- Joined
- Sep 22, 2015
- Messages
- 242
- Motherboard
- Lenovo Yoga C940
- CPU
- i7-9750H
- Graphics
- UHD 630
- Mac
- Mobile Phone
Hey there,
I have spend time today to get Mac running on my Yoga, but I don't know if this is right.
But for someone this could be helpful also to know.
- Intel Core i7 7700HQ
- Samsung 960 NVME M.2
- 15" UHD Display Intel 630 Graphics.
- 24 GB HyperX Ram DDR4
- Disabled Nvidia GTX 1050
The board is based on the Intel 100 chipset.
First I had problems to got the installer started.
So I need to use the OsxAptioFixDrv-64.efi and under SMBIOS the RAM informations which are installed.
I had use the patch-nvme to create a working kext. I haven't insert some kexttopatch till yet.
Also for my CPU I haven't used a fakeCPUid.
On SMBIOS I'm on MacBookPro14,3 for KabyLake.
My next steps will be to patch the SSDT & DSDT file(s).
But first I have some questions,
Do I need for my M.2 SSD the patched kext and patched kexttopatch options?
My Intel 630 don't work. So I'm Injecting the Intel Graphic with the platformid. So only 31MB will be shown on the settings.
My BCM94352z is working directly after installing Mac. This is a wonder. Only the bcm kext was inserted on the clover kext patch (which will later installed on s/l/e)
My first question, is there a way to get the 630 natively working on high Sierra?
Perhaps someone could take a look, best Regards,
Dan
I have spend time today to get Mac running on my Yoga, but I don't know if this is right.
But for someone this could be helpful also to know.
- Intel Core i7 7700HQ
- Samsung 960 NVME M.2
- 15" UHD Display Intel 630 Graphics.
- 24 GB HyperX Ram DDR4
- Disabled Nvidia GTX 1050
The board is based on the Intel 100 chipset.
First I had problems to got the installer started.
So I need to use the OsxAptioFixDrv-64.efi and under SMBIOS the RAM informations which are installed.
I had use the patch-nvme to create a working kext. I haven't insert some kexttopatch till yet.
Also for my CPU I haven't used a fakeCPUid.
On SMBIOS I'm on MacBookPro14,3 for KabyLake.
My next steps will be to patch the SSDT & DSDT file(s).
But first I have some questions,
Do I need for my M.2 SSD the patched kext and patched kexttopatch options?
My Intel 630 don't work. So I'm Injecting the Intel Graphic with the platformid. So only 31MB will be shown on the settings.
My BCM94352z is working directly after installing Mac. This is a wonder. Only the bcm kext was inserted on the clover kext patch (which will later installed on s/l/e)
My first question, is there a way to get the 630 natively working on high Sierra?
Perhaps someone could take a look, best Regards,
Dan