X99 Hackintosh cannot get past system uptime in nano seconds

[Alex98171]

Hi i bought this x99 Gaming/Workstation rig and i have built it specially for dual booting windows and mac.
I got the windows part done but i'm stuck on the mac part.

I boot as normal using these boot flags -x -v dart=0 npci=0x3000 maxmem=8192 GraphicsEnabler=Yes
and every single time i boot i get stuck at the system uptime in nanoseconds. Its like my computer crashes even though the pc is still on. Im new to this hackintosh stuff so a well explained method to solve this problem will be very much appriciated. Thanks

Specs of System

CPU - Intel i7 5820k
Mobo - Gigabyte X99 Gaming G1 Wifi
Ram - 16GB Crucial Ballistix Sport DDR4 2400 (4x4)
SSD - Samsung 850 EVO 250GB
GPU - EVGA GTX 970 SSC

If you need anything else comment down below.

Thanks

 

[Asus-Freak]

http://www.tonymacx86.com/user-buil...e-6-core-i7-5820k-gtx-970-crucial-250-m2.html

 

[Alex98171]

http://www.tonymacx86.com/user-buil...e-6-core-i7-5820k-gtx-970-crucial-250-m2.html

Not quite sure what you meant... Like i said im a noob

 

[Asus-Freak]

Use that link as a guide.

 

[Jithin.C.V]

Not quite sure what you meant... Like i said im a noob

Have you created the bootable USB as per below linked guide ??

Guide : http://www.tonymacx86.com/yosemite-...motherboard-temporary-guide-os-x-10-10-a.html


Try booting cpus=1. If you are getting the same panic screen then post a photo of the screen.

 

[Alex98171]

Have you created the bootable USB as per below linked guide ??

Guide : http://www.tonymacx86.com/yosemite-...motherboard-temporary-guide-os-x-10-10-a.html


Try booting cpus=1. If you are getting the same panic screen then post a photo of the screen.

After using these boot flags, cpus=1 npci=0x3000 GraphicsEnabler=Yes i get to this screen.



Also i used this guide to create the usb disk https://www.youtube.com/watch?v=cx_RD7CduDM

Thanks

 

[Jithin.C.V]

After using these boot flags, cpus=1 npci=0x3000 GraphicsEnabler=Yes i get to this screen.

View attachment 131994View attachment 131995

Also i used this guide to create the usb disk https://www.youtube.com/watch?v=cx_RD7CduDM

Thanks

Try with "dart=0 cpus=1 npci=0x3000 GraphicsEnabler=No nv_disable=1 -v -f"

 

[Alex98171]

Try with "dart=0 cpus=1 npci=0x3000 GraphicsEnabler=No nv_disable=1 -v -f"

It worked thanks.