- Joined
- Jul 25, 2013
- Messages
- 448
- Motherboard
- Asus X99 Deluxe
- CPU
- E5-2697v3
- Graphics
- RX 580
- Mac
- Classic Mac
- Mobile Phone
Hi all,
I'm unable to boot OS X via Clover on my GA-X99-UD4. I've done a standard UEFI install of Clover into the EFI partition of my OS X Yosemite install, and configured boot flags as: npci=0x2000, kext-dev-mode=1 (as required for my build.) I've replaced vboxhfs.efi with the HFSPlus.efi in the 64bit EFI, and added the appropriate kexts into the 10.10 folder I created in /kexts. However, when I start OS X via Clover, I get a black screen, no loading. When booting verbose, I receive this error:
http://www.tonymacx86.com/attachmen...0-10733570_10152703059728213_2010996603_n.jpg
Someone suggested I use slide=0 as a boot flag, and when that didn't work, I was advised to change "0" to different numbers. From what I can tell, the value refers to different places in memory to load the kernel, and when the flag didn't work, some suspected that it was Clover not playing well with DDR4. However, since then, others have had luck booting with Clover on the X99 platform. So, I'm wondering if I could receive some advice here.
System is:
i7-5820K
16GB DDR4
2 x GTX 660
OS X on a GUID Partitioned SSD
(I realize Chimera works on MBR on X99, but there's no iMessage support yet.)
Thanks in advance.
I'm unable to boot OS X via Clover on my GA-X99-UD4. I've done a standard UEFI install of Clover into the EFI partition of my OS X Yosemite install, and configured boot flags as: npci=0x2000, kext-dev-mode=1 (as required for my build.) I've replaced vboxhfs.efi with the HFSPlus.efi in the 64bit EFI, and added the appropriate kexts into the 10.10 folder I created in /kexts. However, when I start OS X via Clover, I get a black screen, no loading. When booting verbose, I receive this error:
http://www.tonymacx86.com/attachmen...0-10733570_10152703059728213_2010996603_n.jpg
Someone suggested I use slide=0 as a boot flag, and when that didn't work, I was advised to change "0" to different numbers. From what I can tell, the value refers to different places in memory to load the kernel, and when the flag didn't work, some suspected that it was Clover not playing well with DDR4. However, since then, others have had luck booting with Clover on the X99 platform. So, I'm wondering if I could receive some advice here.
System is:
i7-5820K
16GB DDR4
2 x GTX 660
OS X on a GUID Partitioned SSD
(I realize Chimera works on MBR on X99, but there's no iMessage support yet.)
Thanks in advance.