- Joined
- Dec 28, 2011
- Messages
- 85
- Motherboard
- Ignore Me
- CPU
- I Ignored
- Graphics
- Forum RULES !!!!
- Mac
- Classic Mac
- Mobile Phone
can't wait to see if the ram works with you. good luck with the assembly. It shouldn't tale too long.
Hi
I finally received all the material to make my build.
a. Motherboard: ASUS WS SAGE / 10G
b. Processor: INTEL i9-10940X
c. Cooling: AIO CORSAIR H150i PRO RGB
d. RAM: CORSAIR VENGEANCE LPX 3200 C16 4X32GB
d. MacOS SSD: Sabrent Rocket 1TB NVMe
f. Windows 10 SSD: Sabrent Rocket 1TB NVMe
g. Graphics card: SAPPHIRE RADEON VII
h. WiFi / BT card: MQUPIN FENVI T919 BCM94360CD
h. TB3 Sheet: GIGABYTE TITAN RIDGE
i. NVMe to PCIe SSD Adapter Card: 2 x EZDIY-FAB PCI Express M.2 SSD NGFF PCIe Card to PCIe 3.0 x4 Adapter (storage solution with 2 x Sabrent Rocket Q 4TB SSD to put in RAID 0 configuration)
l. Power supply: LEADEX II 80 Plus Gold 1200 W
m. case: COOLER MASTER c700p
In the last few weeks I have done a full immersion in OpenCore but before that I have to concentrate on the correct assembly of all the hardware.
If you agree and you will have a little patience with me, I will try to proceed as autonomously as possible, highlighting here all the steps and from time to time my doubts.
The first doubt concerns the order of the cards in the PCIe slots. TB3 mandatory in the 2nd but I'm not sure about the others ...
P.S. Preventive advice will be greatly appreciated