Contribute
Register

X299 Big Sur Support

Joined
Feb 21, 2012
Messages
92
Motherboard
Asus WS X299 SAGE/10G (3203)
CPU
i9-10980XE
Graphics
Radeon VII
Can you post both of the following files: Thunderbolt SSDT, DSDT.aml
Thank you!
SSDT-TB3-1.dsl - RP05, PCie_Slot-2, TB Bus-0, worked great with hotplug etc
SSDT-TB3-2.dsl - PCie_Slot-3, TB Bus-1
SSDT-TB3-3.dsl - PCie_Slot-4, TB Bus-2

update:

PXSX in SSDT-TB3-2 and in SSDT-TB3-3.dsl should be removed. Then UPSB and NHI are appear and TB-switch (IOthunderboltPort@7) is on. But I don't see the DSB0, DSB1, DSB2 and DSB4 - pci-bridge@x only.

New ioreg is attached.
 

Attachments

  • System_DSDT.dsl.zip
    266.9 KB · Views: 24
  • ssdt-tb-all3.zip
    11.1 KB · Views: 24
  • new_ioreg_wo_pxsx.ioreg.zip
    12 MB · Views: 19
Last edited:
Joined
Jul 14, 2019
Messages
103
Motherboard
ASUS WS SAGE/10G
CPU
i9-10940X
Graphics
Radeon VII
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
And again ...
Schermata 2020-08-30 alle 16.29.59.png
 
Joined
Jul 14, 2019
Messages
103
Motherboard
ASUS WS SAGE/10G
CPU
i9-10940X
Graphics
Radeon VII
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
Maybe I understand what could be the problem. As already said, I used the @izo1 EFI. I did't made the USB mapping, I used all the SSDT present in @izo1 EFI. Could be that the problem? And if the answer is yes, how do I do to correct my config? I read post-install Dortania guide, but I didn't understand in my case how to proceed ...
 

Ellybz

Retired
Joined
Apr 16, 2017
Messages
415
Motherboard
Gigabyte X299 WU-8
CPU
I9-7980Xe
Graphics
RX 580
Mobile Phone
  1. Android
Maybe I understand what could be the problem. As already said, I used the @izo1 EFI. I did't made the USB mapping, I used all the SSDT present in @izo1 EFI. Could be that the problem? And if the answer is yes, how do I do to correct my config? I read post-install Dortania guide, but I didn't understand in my case how to proceed ...
You KP is relatively easy to solve.
Most likely it is due to incorrect power set by the USB of your Fenvi Card. Disconnect that cable & check if the KP persists ( You won't have bluetooth in the mean time ). If Your KP stopped then you should create your own USB.Kext & make sure that you feed the connector of your Fenvi to a USB 2.0 port.
Here's a fairly simple guide to create your USB MAP. You'll need Hackintool.
Here's another one from KGP:
Important: the settings of the port used for your FENVI BT should be "0" (Options are 0/3/255) - 255 works also in some cases...I prefer "0".
Also, as I understood in your Mobo, there's no USB 2.0 internal port. Several remedies are possible. In my case I use this:
https://www.amazon.com/gp/product/B07L9RWRMM/?tag=tonymacx86com-20
Last but not least, make sure the SSDT-USBX is present and activated in your config.plist ( ACPI )
Best of luck
 
Last edited:
Joined
Feb 24, 2013
Messages
2,669
Motherboard
N/A
CPU
N/A
Graphics
N/A
Mac
  1. MacBook Air
  2. Mac Pro
Mobile Phone
  1. iOS

These kinds of KPs are mostly related to hardware not software, so the bootloader won't cause these issues.
It may be related to XMP, bad RAM, CPU overclock, certain PCIe cards, etc.

For now as another user recommended, try maybe creating a new USB map or use USBInjectAll feature temporarily in your config file to see where the problem lies.

Maybe try another PCIe slot for your FENVI card, and use another USB2.0 > USB 3.0 internal adapter.

Also does your system completely freeze or just reboots and then you see the KP pop up after reboot?
 
Joined
Apr 18, 2011
Messages
1,328
Motherboard
ASUS ROG Z690 Extreme
CPU
Intel i9-12900k
Graphics
Radeon Pro W5500
Mac
  1. MacBook Air
  2. Mac Pro
Mobile Phone
  1. iOS
These kinds of KPs are mostly related to hardware not software, so the bootloader won't cause these issues.
It may be related to XMP, bad RAM, CPU overclock, certain PCIe cards, etc.

For now as another user recommended, try maybe creating a new USB map or use USBInjectAll feature temporarily in your config file to see where the problem lies.

Maybe try another PCIe slot for your FENVI card, and use another USB2.0 > USB 3.0 internal adapter.

Also does your system completely freeze or just reboots and then you see the KP pop up after reboot?

@Ghostmac1969 Yeah might be an issue related to the bent cpu pins?
If you are adjusting your usb kext you can also use my usb map since it’s the same board (all ports are defined) just set whichever port is fenvi Bluetooth to 255.

 
Last edited:
Joined
Jul 14, 2019
Messages
103
Motherboard
ASUS WS SAGE/10G
CPU
i9-10940X
Graphics
Radeon VII
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
Also, as I understood in your Mobo, there's no USB 2.0 internal port. Several remedies are possible. In my case I use this:
https://www.amazon.com/gp/product/B07L9RWRMM/?tag=tonymacx86com-20
Last but not least, make sure the SSDT-USBX is present and activated in your config.plist ( ACPI )
Best of luck
Yes, in my mainboard there isn't an usb 2.0 header, so I used
Schermata 2020-08-30 alle 21.14.14.png


So the USB cable of the FENVI card is plugged into USB 2.0 hub. In the same hub are plugged Corsair hydro 150i and Titan Ridge card. Which USB port I have to set as "0"?
And speaking about USB port mapping,
1) this is my EFI situation:

Schermata 2020-08-30 alle 21.26.28.png


2) should I disable and/or load something before proceeding?
 

Attachments

  • Schermata 2020-08-30 alle 21.13.38.png
    Schermata 2020-08-30 alle 21.13.38.png
    128.3 KB · Views: 14
Joined
Jul 14, 2019
Messages
103
Motherboard
ASUS WS SAGE/10G
CPU
i9-10940X
Graphics
Radeon VII
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
Also does your system completely freeze or just reboots and then you see the KP pop up after reboot?
My system just reboots and then I see the KP popup
 
Top