Contribute
Register

[WIP-Guide] Hp Envy 15-as133cl

Status
Not open for further replies.
RehabMan said:
"Problem Reporting" files are incomplete (EFI/Clover is missing).
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the tool mentioned in the FAQ, that way it is less likely you'll omit something.
Click to expand...
I'm sorry, but there are attached files:
What's wrong with them? Used same zips in previous post and they were ok for you.
CLOVER.zip is required EFI/Clover files included files that were obtained while i pressed F2 + F4 and with eliminated themes dir.
 
spurdo88 said:
I'm sorry, but there are attached files:
What's wrong with them? Used same zips in previous post and they were ok for you.
CLOVER.zip is required EFI/Clover files included files that were obtained while i pressed F2 + F4 and with eliminated themes dir.
Click to expand...

Please attach new files, not point to old files.
Any change requires new "problem reporting" data.

Note: The gen_debug.sh script should pick up your EFI/Clover automatically. If it doesn't, you probably have not configured your system correctly (eg. no CLOVER on system EFI partition?)
 
RehabMan said:
(eg. no CLOVER on system EFI partition?)
Click to expand...
Installed CLOVER to system disk, replaced config.plist, installed kexts to s\l\e & patched acpi, pressed F1 and F2 on startup, generated new report. Please take a look on it.
 

Attachments

  • debug_10124.zip
    1.3 MB · Views: 87
Last edited:
Do you know if the Wifi Card you used will work in a HP AY041WM. Installed High Sierra and got everything working except the Wifi/Bluetooth. So wanna switch it out with a compatible card. Everyone that sells the card you use says incompatible with HP. Thanks!


 
Twoods196 said:
Do you know if the Wifi Card you used will work in a HP AY041WM. Installed High Sierra and got everything working except the Wifi/Bluetooth. So wanna switch it out with a compatible card. Everyone that sells the card you use says incompatible with HP. Thanks!
Click to expand...
According to your existing module, you got M.2 port, so u need to use BCM94352Z HMB/AzureWave AW-CE162NF/DW1560.
Please check this guide. https://www.tonymacx86.com/threads/broadcom-wifi-bluetooth-guide.242423/

My card won't work with your laptop because it is half mini one.
 
spurdo88 said:
According to your existing module, you got M.2 port, so u need to use BCM94352Z HMB/AzureWave AW-CE162NF/DW1560.
Please check this guide. https://www.tonymacx86.com/threads/broadcom-wifi-bluetooth-guide.242423/

My card won't work with your laptop because it is half mini one.
Click to expand...

Thanks for the reply! Yeh the DW1560 was what I was looking at as it seems to be the correct NGFF M.2 but every seller has a note that says “not compatible with hp” not sure why. Example is this listing on eBay http://vi.raptor.ebaydesc.com/ws/eB...ategory=20318&pm=1&ds=0&t=1516124820000&ver=0
 
spurdo88 said:
Installed CLOVER to system disk, replaced config.plist, installed kexts to s\l\e & patched acpi, pressed F1 and F2 on startup, generated new report. Please take a look on it.
Click to expand...

Try different ig-platform-id (0x59260002). Remove config.plist/Devices/FakeID/IntelGFX or set to zero.
 
RehabMan said:
Try different ig-platform-id (0x59260002).
Click to expand...
Wow, that fixed my issue! Thanks. Can you please give some links which explains it?
RehabMan said:
Remove config.plist/Devices/FakeID/IntelGFX or set to zero.
Click to expand...
Is it mandatory if changing platform-id helped me?
RehabMan said:
Some HP's have a BIOS WiFi whitelist, hence the warning about HP by the seller.(0x59260002).
Click to expand...
Completely forgot about it. Had to patched my previous lenovo for whitelisting wifi.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top