- Joined
- Aug 13, 2016
- Messages
- 46
- Motherboard
- HP Envy 15-as133cl (Clover)
- CPU
- 7500U / KabyLake Rev2 / Lake-Y PCH Rev 21
- Graphics
- HD 620, 1920x1080
- Mobile Phone
BIG THANKS TO REHABMAN FOR HIS HELP!!!!
It would've not been possible without him!
https://support.hp.com/us-en/product/hp-envy-15-as100-notebook-pc/12499192/model/12780757/
It would've not been possible without him!
https://support.hp.com/us-en/product/hp-envy-15-as100-notebook-pc/12499192/model/12780757/
What's working :
- Audio
- Usb
- Wifi (replaced the wifi card)
- BT
- Backlight control and its related keyboard keys
- Sleep/Restart/Shutdown
- CPU PM
- Trackpad and its pref pane
- Webcam
- battery status
- Hdmi output : No sound. (i'm using AppleALC.Kext)
- Touchscreen (VoodooI2C is my best bet, i got an Elan2097 touchscreen)
- Sd card Reader (didnt try to make it work)
- Usb C (i got nothing to test it, pretty sure it got disabled when i fixed the usb port)
1. The Installation.
Follow this guide, this installation will go smoothly.
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
Based on the guide... You should have the following kexts in your 'clover/kexts/other' folder:
- IntelGraphicsFixup.kext
- Lilu.kext
- VoodooPS2Controller.kext
- USBInjectAll.kext
- FakeSMC.kext
2. Optimisation.
- Additionnal Kexts (in s/l/e)
All the kexts we used in the installation should be put in this folder.. they will be cached and will allow a faster boot time.
- IntelGraphicsFixup.kext - From Rehabman installation guide (in clover/kexts/other/)
- Lilu.kext - From Rehabman installation guide (in clover/kexts/other/)
- VoodooPS2Controller.kext - From Rehabman installation guide (in clover/kexts/other/)
- USBInjectAll.kext - From Rehabman installation guide (in clover/kexts/other/)
- FakeSMC.kext - From Rehabman installation guide (in clover/kexts/other/)
For my wifi/bluetooth card ( BCM94352Z ), i needed the following kexts :
----Wifi-------- (BCM94352Z, https://www.ebay.ca/itm/wifi-card/182794913227)
- FakePCIID.kext - From Rehabman Bitbucket
- FakePCIID_Broadcom_WiFi.kext - From Rehabman Bitbucket
- BrcmPatchRAM2.kext - From Rehabman Bitbucket
- BrcmFirmwareRepo.kext - From Rehabman Bitbucket
- ACPIBatteryManager.kext - From Rehabman BitBucket
- AppleALC.kext - From vit9696 github page
- AppleBacklightInjector.kext - From Rehabman Bitbucket
- DSDT Patches
Luckily, i went for a full hotpatched hackintosh... so it's pretty simple. There's no need to use MacIASL
- Config.Plist AND Hotpatched SSDT Files
Use the config.plist provided.
Put the content of hotpatches.zip in clover/acpi/patched
At this point, you got pretty much everything working... except hdmi audio.. and maybe shutdown... :'(
(and of course, touch screen... but that's another story)
- Fixing Shutdown problem
(if you have any...)
I tried every shutdown fix patches on my dsdt, all the easy fix in clover config.plist... nothing worked...
Some even said I might need to update the intel ME Firmware... But it didn't change anything...
Luckily, i stumbled on a shutdown fix, randomly online... here: https://github.com/Kaijun/Acer-V5-573g-DSDT
Code:
#Shutdown Fix
into method label _PTS code_regex (If\s*\(LEqual\s*\(Arg0,\s*0x05\)\)\s*\n\s*\{\s*\n)(?:[^\n\}]+\n)+(\s*\}) replace_matched begin
%1
Store (Zero, SLPE)\n
Sleep (0x10)\n
%2
end;
into definitionblock code_regex . code_regex_not OperationRegion\s*\(PMRS insert begin
OperationRegion (PMRS, SystemIO, 0x1830, One)\n
Field (PMRS, ByteAcc, NoLock, Preserve)\n
{\n
, 4, \n
SLPE, 1\n
}
end;
This shutdown fix, applied to a decompiled dsdt.dsl (from clover F4/FN+F4 magic clover/acpi/origin) worked.
You'll also need to comment out a line in order to compile this dsdt.dsl:
(like that : // at the beginning of the line)
-External ‘BNUM’ Ref
More information about how to get a dsdt.dsl can be found here :
https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/
Sadly, this... make it not a full hotpatched hackintosh... but.. i did my best
Original post :
Hi,
I just got this laptop
https://support.hp.com/us-en/product/hp-envy-15-as100-notebook-pc/12499192/model/12780757/
with this exact specs :
https://support.hp.com/in-en/document/c05318840
and i was wondering where should i start to go directly on high sierra. I got a sony vaio svs13 2012 running sierra right now, but i had enough luck to discover a step by step guide for this one... I had to buy a wifi card, i guess i also need to with this laptop... Well i'm just looking for insight on where i should start.. once i get it working ill get the appropriate wifi card
Thank you!
I just got this laptop
https://support.hp.com/us-en/product/hp-envy-15-as100-notebook-pc/12499192/model/12780757/
with this exact specs :
https://support.hp.com/in-en/document/c05318840
and i was wondering where should i start to go directly on high sierra. I got a sony vaio svs13 2012 running sierra right now, but i had enough luck to discover a step by step guide for this one... I had to buy a wifi card, i guess i also need to with this laptop... Well i'm just looking for insight on where i should start.. once i get it working ill get the appropriate wifi card
Thank you!
Attachments
Last edited: