- Joined
- Jun 10, 2020
- Messages
- 21
- Motherboard
- iMAC
- CPU
- Intel Cote i5 2.7 MHz
- Graphics
- Radeon 4570
- Mac
- Mobile Phone
Hi all,
after couple of days researching and unsuccessful implementation of different guides from this forum to make my BT working, I have decided to write this post and to provide all specific details in my case.
My build:
mobo: Gigabyte Z390 aorus ULTRA
CPU: Intel Core i5 9600K (with iGPU in headless mode)
dGPU: Sapphire Radeon RX 580 Pulse 8 GB
RAM 16 GB Corsair 3200
SSD m.2 500 GB
running Mojave 10.14.6
I am using Open Core 0.5.9 as a bootloader and everything is working fine. My motherboard has integrated Wifi and BT support, but I have disabled it in BIOS.
Following different guides how to properly map USB ports, I have learned to process and I understand that the first step is always to temporary enable ALL available USB ports, then using Hackintool, select real ports and create a custom port mapping which is using max 15 ports (3.0 and 3.1 count as 2 ports by macOS). All this is clear, but my problem is even with USBInjectAll.kext, I see only 16 ports in my computer and I don't see HS14 nor HS15 which are available USB 2.0 ports on my motherboard that I can use to connect FENVI WiFi/BT PC card. I think that is the main reason that my WiFi is working fine, but BT is not, because on board USB 2.0 is not identified by Mojave.
This mobo has:
- 4 usb 2.0 ports on teh back (none of them is working)
- 2 usb 3.0 on the front of the case (working OK)
- 2 usb 3.0 on the back (working OK)
- 3 usb 3.1 A on the back (working OK)
- 1 usb 3.1 C on the back (not tested)
I do have available 2 usb 2.0 headers on mobo where I can plugin my Fenvi cable, but BT is not seen by Mojave, regardless which port I use.
Apparently, I am missing something, but I don't know what is it.
Attached: boot drive EFI, IO Registry and screenshot of Hackintool USB view (without USBInjectAll.kext).
Any help would be highly appreciated.
after couple of days researching and unsuccessful implementation of different guides from this forum to make my BT working, I have decided to write this post and to provide all specific details in my case.
My build:
mobo: Gigabyte Z390 aorus ULTRA
CPU: Intel Core i5 9600K (with iGPU in headless mode)
dGPU: Sapphire Radeon RX 580 Pulse 8 GB
RAM 16 GB Corsair 3200
SSD m.2 500 GB
running Mojave 10.14.6
I am using Open Core 0.5.9 as a bootloader and everything is working fine. My motherboard has integrated Wifi and BT support, but I have disabled it in BIOS.
Following different guides how to properly map USB ports, I have learned to process and I understand that the first step is always to temporary enable ALL available USB ports, then using Hackintool, select real ports and create a custom port mapping which is using max 15 ports (3.0 and 3.1 count as 2 ports by macOS). All this is clear, but my problem is even with USBInjectAll.kext, I see only 16 ports in my computer and I don't see HS14 nor HS15 which are available USB 2.0 ports on my motherboard that I can use to connect FENVI WiFi/BT PC card. I think that is the main reason that my WiFi is working fine, but BT is not, because on board USB 2.0 is not identified by Mojave.
This mobo has:
- 4 usb 2.0 ports on teh back (none of them is working)
- 2 usb 3.0 on the front of the case (working OK)
- 2 usb 3.0 on the back (working OK)
- 3 usb 3.1 A on the back (working OK)
- 1 usb 3.1 C on the back (not tested)
I do have available 2 usb 2.0 headers on mobo where I can plugin my Fenvi cable, but BT is not seen by Mojave, regardless which port I use.
Apparently, I am missing something, but I don't know what is it.
Attached: boot drive EFI, IO Registry and screenshot of Hackintool USB view (without USBInjectAll.kext).
Any help would be highly appreciated.