Which graphics card to choose for a budget computer?

[Don-Andrea]

Hakintosh collect. In stock:
Motherboard: Gigabyte GA-H61M-DS2
RAM: 4gb
Processor: Core i3 3220
and etc.

I'll set the Mountain Lion. You might be well advised to choose what kind of video card? Preferably not expensive, in the range $50-70.
Personally, I opted for the: Radeon HD6670 or nVidia GeForce 210 or GeForce GT220.
The question is, will these cards work on a clean operating system (that is, without kexts and etc).
And from what manufacturer to choose the best for this card, please advise the specific options.
Thank for advice.

 

[mynos]

Hei i have the same old computer like you.Did you manage to install on it Mountain Lion? Can you give me advice?
Gigabyte GA-H61M-DS2, Core i3 3220, 4gb 1333Mz, GeForce 210.

 

[Feartech]

Hei i have the same old computer like you.Did you manage to install on it Mountain Lion? Can you give me advice?
Gigabyte GA-H61M-DS2, Core i3 3220, 4gb 1333Mz, GeForce 210.

Don-Andrea hasn't been seen since 2013

 

[Adrian B]

Geforce GT210 will require that you use GraphicsEnabler=Yes bootflag.

Do I need GraphicsEnabler Injection or Not?

Do I need GraphicsEnabler Injection or Not? GraphicsEnabler=No All ATI/AMD Radeon 5xxx, 6xxx, 7xxx, Rx-200 NVIDIA GeForce 640+, 7xx, TITAN GraphicsEnabler=Yes ATI Radeon 4xxx NVIDIA GeForce 9xxx, 2xx, 4xx, 5xx NVIDIA GeForce 610-630 The latest versions of UniBeast and Multibeast for 10.9 have...

www.tonymacx86.com

 

[mynos]

Geforce GT210 will require that you use GraphicsEnabler=Yes bootflag.

Do I need GraphicsEnabler Injection or Not?

Do I need GraphicsEnabler Injection or Not? GraphicsEnabler=No All ATI/AMD Radeon 5xxx, 6xxx, 7xxx, Rx-200 NVIDIA GeForce 640+, 7xx, TITAN GraphicsEnabler=Yes ATI Radeon 4xxx NVIDIA GeForce 9xxx, 2xx, 4xx, 5xx NVIDIA GeForce 610-630 The latest versions of UniBeast and Multibeast for 10.9 have...

www.tonymacx86.com

And for AMD Radeon 6670 HD?

 

[Adrian B]

And for AMD Radeon 6670 HD?

Try without adding an additional flag. GraphicsEnabler=No probably works and is the standard setting that is already set.