Contribute
Register

Weird problem after update

Status
Not open for further replies.
Joined
Jun 16, 2017
Messages
6
Motherboard
MSI h110m pro-vd
CPU
Intel i3-6100 3.70ghz
Graphics
NVIDIA GeForce GTX 1050 Ti
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
Hi all,

macOS Sierra 10.12.6 - MSI h110m pro-vd - intel core i3-6100 3.70ghz -
NVIDIA GeForce GTX 1050

I have a weird problem after updating to 10.12.6

System goes on kernel panic because it doesn't know graphic card CPU
I boot in safe mode fine
I install WebDriver-378.05.05.25f01 from Nvidia
System works fine
If I change anything in clover/config.plist or in a kext or if I run multibeast to add a driver or anything similar then again
System goes on kernel panic
I boot in safe mode
I install WebDriver-378.05.05.25f01 from Nvidia
System works fine

So my questions are:
1. do anybody has an idea why it happens?
2. what happens during the re-installation of the webdriver that makes the system work again?

thanks
 
The Rules said:
Profiles need to contain at least your primary system to assist others with helping you

The most likely cause of your problem is the need to emulate native NVRAM - Problem 6
 
(Profiles need to contain at least your primary system to assist others with helping you)
Sorry for that. Fixed.

Thanks for reply.
I did install NVRAM following Problem 6 guide, I had to do it as well in the past to have it work.
But now it seems like if NVRAM sometimes doesn't old the information and I have to re-install the webdriver again (no need to reinstall the NVRAM) to have it work again.
I'll do some more test, but you have any guess about it you're more than welcome.
I'm attaching config.plist and ioreg just in case you want to give a look.

thank you very much
 

Attachments

  • config.plist.zip
    1.5 KB · Views: 76
  • iMac di Sandro.ioreg
    8.5 MB · Views: 130
I'm attaching config.plist
No wonder you are having problems.
If you are using Nvidia graphics why are you injecting Intel ?
You also must set NvidiaWeb = true as per Link

Installation procedure :
BIOS - Disable Integrated graphics - Set PEG as Primary
Use a digital connection - DVI or HDMI - VGA is not supported.
Boot with nv_disable=1
May need to update Clover
Install web drivers
Config.plist - Do not inject Intel or Nvidia graphics and no ig-platform-id
Config.plist - Disable SIP fully - CsrActiveConfig 0x67
Edit config.plist - NvidiaWeb = true as per Link
May need to emulate native NVRAM - Problem 6
Remove nv_disable=1 from config.plist
May need to install Lilu.kext and NvidiaGraphicsFixup.kext to /Library/Extensions

Potential Problems :
HDMI 2.0 is not supported - Use HDMI 1.4
If your graphics card has more than one output of the type that you are using then try another one.
Black Screen with MacPro 6,1 or iMac 15 or iMac 17 System Definition
 
Procedure done and checked.
I'll update this thread with followup for anybody else that may need it.

Thxal
 

Attachments

  • config.plist.zip
    1.6 KB · Views: 75
Status
Not open for further replies.
Back
Top