- Joined
- Jun 1, 2013
- Messages
- 310
- Motherboard
- Gigabyte Z490 Vision D
- CPU
- I7-10700K
- Graphics
- 5600XT & 6800 XT
- Mac
- Mobile Phone
Hi all,
Not sure if it is the right forum for this issue but if not, please moderators move it to the right location. I am having issues with the latest clover but not in the same way than what people are reporting. I have been using Mojave since its introduction last year and before upgrading to Catalina, I upgraded clover to 5070 then installed Catalina. No issue, everything worked fine. The installation was on a 500GVB SSD. Last week I bought a 1TB NVMe drive because I was running out of disk space on the 500GB.
I formatted the NVMe drive with the GUI partition scheme + APFS. From there I installed clover 5097 then copied my custom kexts under kext/others (I ticked the necessary boot option). Mainly fakesmc and my network kexts. I also copied across my config.pliust to the 1TB drive. I noticed that the EFI folders structure is different between 5070 and 5097, in particular there is no folder such as drivers32, drivers64, etc. Finally I cloned my current Catalina installation on the 500GB onto the 1TB using carbon copy cleaner.
Everything went fine.
After cloning Catalina on the 1TB, I rebooted, went into the bios and only left the 1TB as a boot drive. The system booted ok but the issue is that I had no internet. Looking at the boot log, it looks like the kexts in other were injected correctly(by the way my kextinject flag in config.plist is set to "detect" but I also tried with "yes").
Now here is the funny or weird thing; if I go into the bios, set the boot drive to be my 500GB SSD (which has clover 5070) then press a key at the clover splash screen and select the 1TB NVMe disk to boot from, it will boot from the NVMe drive with no issue,including internet (I am writing this post from the booted 1TB NVMe drive).
So to sum up, if I boot from the NVMe which has 5097 (also tried with 5078), it loads Catalina but no internet and the rest is ok (sound for instance).
If I boot from the 500GB which has clover 5070, then press a key at the clover splash screen, select the NVMe drive to boot from it boots with no issue and internet is working.
Any suggestion?
It is driving me crazy.
Thanks
Not sure if it is the right forum for this issue but if not, please moderators move it to the right location. I am having issues with the latest clover but not in the same way than what people are reporting. I have been using Mojave since its introduction last year and before upgrading to Catalina, I upgraded clover to 5070 then installed Catalina. No issue, everything worked fine. The installation was on a 500GVB SSD. Last week I bought a 1TB NVMe drive because I was running out of disk space on the 500GB.
I formatted the NVMe drive with the GUI partition scheme + APFS. From there I installed clover 5097 then copied my custom kexts under kext/others (I ticked the necessary boot option). Mainly fakesmc and my network kexts. I also copied across my config.pliust to the 1TB drive. I noticed that the EFI folders structure is different between 5070 and 5097, in particular there is no folder such as drivers32, drivers64, etc. Finally I cloned my current Catalina installation on the 500GB onto the 1TB using carbon copy cleaner.
Everything went fine.
After cloning Catalina on the 1TB, I rebooted, went into the bios and only left the 1TB as a boot drive. The system booted ok but the issue is that I had no internet. Looking at the boot log, it looks like the kexts in other were injected correctly(by the way my kextinject flag in config.plist is set to "detect" but I also tried with "yes").
Now here is the funny or weird thing; if I go into the bios, set the boot drive to be my 500GB SSD (which has clover 5070) then press a key at the clover splash screen and select the 1TB NVMe disk to boot from, it will boot from the NVMe drive with no issue,including internet (I am writing this post from the booted 1TB NVMe drive).
So to sum up, if I boot from the NVMe which has 5097 (also tried with 5078), it loads Catalina but no internet and the rest is ok (sound for instance).
If I boot from the 500GB which has clover 5070, then press a key at the clover splash screen, select the NVMe drive to boot from it boots with no issue and internet is working.
Any suggestion?
It is driving me crazy.
Thanks
Last edited: