Surface Pro 3 Core i5 4300 U 1.9 GHz 4 GB RAM 128 GB It is trying to install Voodoo I 2 C on SSD.
I am reading the installation procedure, but I have something to tell you.
I'm about to use it in polling mode and I'm trying to patch DSDT.
Changed part of _CRS method as follows.
Change before:
Method (_CRS, 0, NotSerialized) // _ CRS: Current Resource Settings
{
Name (SBFI, ResourceTemplate ()
{
I2cSerialBusV2 (0x0060, ControllerInitiated, 0x000F4240,
Addressing Mode 7 Bit, "\\ _ SB.PCI 0. I 2 C 1",
0x00, ResourceConsumer,, Exclusive,
)
Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, ,,,)
{
0x00000022,
}
})
Return (SBFI)
}
After change:
Method (_CRS, 0, NotSerialized) // _ CRS: Current Resource Settings
{
Name (SBFB, ResourceTemplate ()
{
I2cSerialBusV2 (0x0060, ControllerInitiated, 0x000F4240,
Addressing Mode 7 Bit, "\\ _ SB.PCI 0. I 2 C 1",
0x00, ResourceConsumer,, Exclusive,
)
})
Return (SBFB)
}
When starting up, the following error was output to system.log.
Could not get interrupt event source
Is it necessary to patch GPIO Pinning?
IOInterruptSpecifiers are not displayed like the attached image.