- Joined
- Apr 21, 2016
- Messages
- 1,005
- Motherboard
- ASUS X556UA-Clover
- CPU
- i5-6200U
- Graphics
- HD 520,1366x768
- Mobile Phone
You can have a look in Windows Device Manager to check for an additional input device, and see how it's connected.Yes my trackpad must be essentially the same as the XPS trackpad but it has two physical buttons. Uncommon yes but very handy actually.
Actually I wonder if the physical buttons are part of the i2c trackpad or are independent devices, PS maybe? because they have their own connection to the motherboard according to the manual. Or Am I just asking nonsense?
How difficult it would be to add support for the buttons in the code?
If you have enough knowledge in kernel & kext development, you'll be able to diagnose the input coming from the trackpad and see if it's sending any interrupt when pressing the buttons, then modifying the kext to adapt for this.
BTW, you should not put .aml/.dsl files in Clover/ACPI. Only in Clover/ACPI/patched.
apfs.efi should be in drivers64UEFI. Though you're not using APFS
Why you have both HFSPlus.efi and HFSPlus-64.efi? Remove both and get known good driver from the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
AptioMemoryFix.efi preferred over OsxAptioFix3Drv-64.efi.