VoodooI2C Help and Support

[alex.daoud]

Thanks for your reply feartech -

As per https://voodooi2c.github.io/#Satellite I searched for the ACPI device ID in IORegExplorer and found the compatible property "PNP0C50" so I have also tried placing VoodooI2CHID.kext in clover / kexts / 10.12

After a restart, the trackpad still has same strange behaviour of continuing to slide if you swipe the surface in a direction and let go. If I hold down the surface and try to drag the highlight box disappears after a second or two max.

cheers,

You are using an old version of VoodooI2C. Ensure that you download the latest version from the releases page: https://github.com/alexandred/VoodooI2C/releases . Then make sure there are no old versions of VoodooI2C installed anywhere in /s/l/e, /l/e or Clover injection directory. Then carefully follow the installation instructions.

 

[somatevy]

@ben9923 please help me to fix GIPO Pinning as the result you use to help me to adjust the my trackpad working on version 1.0.4 but I got no chance on 2.0.1 . Please I read the instruction ready but no chance that my track pad is going to work again

 

[petervahaviolos]

Still can't get this goddamn thing to work, running an elan 1300 trackpad on an asus ux430ua. Below I attached my ioregistry, patched dsdt and log file

 

[alex.daoud]

...

The IOReg you provided is not using IORegExplorer v2.1. You must use IORegExplorer v2.1 (https://www.tonymacx86.com/threads/guide-how-to-make-a-copy-of-ioreg.58368/)

There is also no need to provide the log in PDF format (this hinders debugging). A text file is fine.

Your DSDT looks fine so I suspect the kext is not in the correct install location. Where did you install it?

 

[petervahaviolos]

Did you have a previous version of VoodooI2C ever installed?

Yes, im not sure what version it was though. Just used the VoodooI2C.kext from this post
https://www.tonymacx86.com/threads/...310ua-macos-sierra-installation-guide.224591/

 

[alex.daoud]

Yes, im not sure what version it was though. Just used the VoodooI2C.kext from this post
https://www.tonymacx86.com/threads/...310ua-macos-sierra-installation-guide.224591/

Sounds like old DSDT patches for previous versions are the issue here then (your IOReg seems to confirm this). I recommend starting with a fresh DSDT from clover F4 (or, at least, a DSDT you know that works that has never been patched for any version of VoodooI2C) and applying the patches for v2 again (your GPIO pinning was fine so you can just copy that over into your fresh DSDT once you've applied the other patches).

 

[petervahaviolos]

Sounds like old DSDT patches for previous versions are the issue here then (your IOReg seems to confirm this). I recommend starting with a fresh DSDT from clover F4 (or, at least, a DSDT you know that works that has never been patched for any version of VoodooI2C) and applying the patches for v2 again (your GPIO pinning was fine so you can just copy that over into your fresh DSDT once you've applied the other patches).

Holy **** it worked thank you so much!

 

[parasthakur37]

Thanks OP you are a legend

After removing the contents of _INI, you saved the patched file as DSDT.aml and copied it to EFI/CLOVER/kexts/Other?

 

[Feartech]

After removing the contents of _INI, you saved the patched file as DSDT.aml and copied it to EFI/CLOVER/kexts/Other?

aml files go into clover/acpi/patched folder

 

[parasthakur37]

aml files go into clover/acpi/patched folder

Oh yes, I'm sorry for the typo, I meant that only. After pasting it there its giving me a kernel panic.
Deleted it for now.