Contribute
Register

VoodooI2C Help and Support

Joined
Jan 19, 2020
Messages
2
Motherboard
SF315-52G-56FR
CPU
i5 8250U
Graphics
UHD 620 + MX150
Hi, I have been trying to make Voodoo work since last night but no hope... It was working when I was using OpenCore 0.5.3 and booting from USB, but I upgraded to 0.5.4 and using main drive's EFI partition. Now, It doesn't work. ( To be honest, it wasn't very stable before) If somebody could help me, it would be wonderful!
 

Attachments

  • SF315SupportPackage.zip
    833.6 KB · Views: 53
Joined
Apr 24, 2016
Messages
3
Motherboard
HM370
CPU
i5 8300H
Graphics
UHD 630/ GTX 1050 Ti
Mobile Phone
  1. Android
Hello, my IOinterruptSpecifers DATA <39 00 00 00 03 00 00 00> so basically 0x39 PIN number, I know I have to manually add pin inorder to work my touchpad ELAN 1200 but I am totally lost I have tried most of pins I can get from the calculation but nothing works I hope someone can help me to fix this I have attached all the required files clover kernel logs ioregs.
 

Attachments

  • Send me Ankits-MacBook-Pro.zip
    2.4 MB · Views: 41
Joined
Mar 10, 2015
Messages
38
Motherboard
Lenovo ideapad s340-14iwl
CPU
i5-8265U
Graphics
UHD620
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
1)
If I install v2.3 to /L/E or /S/L/E , it cause hanging during boot.
v2.2 had no problems.

I can use v2.3 only clover injected kext mode.

2)
How can I load i2c touchpad in recovery boot?

Although I should boot recovery hd to solve problem ‘1)’, in recovery mode touchpad does not be recognized.

*Catalrina prevent read-write volume in single-mode. So I can’t delete kext from /L/E boot with single mode.
 

Feartech

Moderator
Joined
Aug 3, 2013
Messages
25,993
Motherboard
Asus N752VX-OpenCore
CPU
i7-6700HQ / HM170
Graphics
HD 530 1920 x 1080
Mac
  1. iMac
Mobile Phone
  1. iOS
1)
If I install v2.3 to /L/E or /S/L/E , it cause hanging during boot.
v2.2 had no problems.

I can use v2.3 only clover injected kext mode.

2)
How can I load i2c touchpad in recovery boot?

Although I should boot recovery hd to solve problem ‘1)’, in recovery mode touchpad does not be recognized.

*Catalrina prevent read-write volume in single-mode. So I can’t delete kext from /L/E boot with single mode.
run these 3 commands in terminal:
Code:
sudo spctl --master-disable
sudo mount -uw /
sudo killall Finder

then you can delete your kexts

also only apple kexts belong in /S/L/E

3rd party kexts belong in /L/E

or install them all to clover/kexts/other only
 
Joined
Nov 18, 2018
Messages
67
Motherboard
Lenovo Ideapad S340
CPU
i5-8265U
Graphics
HD 620
Mobile Phone
  1. iOS
Hoping by posting directly to the VoodooI2C thread can help us. This is for the Ideapad S340, @4mit has created an install guide for us which works great except that not everyone were able to get the Trackpad working. So far it seems the i5 model owners have the most issues. VoodooI2CHID seems to be the culprit, in my machine it is pretty inconsistent - sometimes it loads, other times it doesn't. I attached the debug file to this post in the hope that some is able to help us figure out this issue.
 

Attachments

  • debug_8008.zip
    2.7 MB · Views: 40
Joined
Mar 27, 2019
Messages
4
Motherboard
Dell 3590
CPU
i5-9300H
Graphics
HD 630
Nope that didn't work out either /: , do you think ACPIBatteryManager may be interfering with the kext? I read in some post that in some cases it, is there a way to see if voodooIC2HID is working? or the logger?

I have the same model as you, (Dell 3590 with i5 and GTX 1650) and I already have more than 2 months trying to make these i2c kexts work, but without success :banghead: (and I still haven't found anyone that has managed to make it work on the 3590). I believe that for our model, no gestures on the trackpad.:cry:
 
Joined
Dec 3, 2019
Messages
11
Motherboard
DELL G3 3590
CPU
i7-9750H
Graphics
GTX 1660 Ti / UHD 630
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
  2. iOS
I have the same model as you, (Dell 3590 with i5 and GTX 1650) and I already have more than 2 months trying to make these i2c kexts work, but without success :banghead: (and I still haven't found anyone that has managed to make it work on the 3590). I believe that for our model, no gestures on the trackpad.:cry:
:( Hey but do you have the trackpad at least working? Because I don't know what I did but I got the trackpad working without gestures and it was no showing at the preferences but when I shut it down it stopped working $: at least I'd like to have it working you know just to free an USB port haha
 
Joined
May 8, 2013
Messages
63
Motherboard
LENOVO IdeaPad S340-14IWL
CPU
i5-8265U
Graphics
UHD 620
Mac
  1. Mac mini
Mobile Phone
  1. iOS
Hoping by posting directly to the VoodooI2C thread can help us. This is for the Ideapad S340, @4mit has created an install guide for us which works great except that not everyone were able to get the Trackpad working. So far it seems the i5 model owners have the most issues. VoodooI2CHID seems to be the culprit, in my machine it is pretty inconsistent - sometimes it loads, other times it doesn't. I attached the debug file to this post in the hope that some is able to help us figure out this issue.
same problem, trackpad name seems to be TPAD
 

Attachments

  • Снимок экрана 2020-01-30 в 20.17.16.png
    Снимок экрана 2020-01-30 в 20.17.16.png
    113.8 KB · Views: 132
  • Снимок экрана 2020-01-30 в 20.33.00.png
    Снимок экрана 2020-01-30 в 20.33.00.png
    109.6 KB · Views: 143
  • Снимок экрана 2020-01-30 в 20.33.14.png
    Снимок экрана 2020-01-30 в 20.33.14.png
    104.4 KB · Views: 113
Joined
Feb 18, 2012
Messages
98
Motherboard
Hp Spectre X360 15
CPU
i7 7500U
Graphics
620, 4K
Is there a way to have the ink shortcut to show in system preference. I have the touchscreen working with hp spectre x360. I remember it showed one time for macos sierra or earlier version.
 
Top