Contribute
Register

[USBInjectAll] SSxx not discover USB 3.0 when plug in

Status
Not open for further replies.
Joined
Feb 9, 2018
Messages
19
Motherboard
Acer VX5
CPU
I5-7300HQ
Graphics
HD 630+GTX 1050
Mobile Phone
  1. Android
  2. iOS
Hi everyone, I have followed https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/

At the discover port step, I had discover HS01 (USB 3.0 port), HS02 (USB 3.0 port), HS05 (USB 2.0 port), HS07 wifi card, HS09 HD cam, HS10 Card reader
Screen Shot 2018-12-18 at 00.31.50.png
Ok next step, I added -uia_exclude_hs uia_include=HS01,HS05
Screen Shot 2018-12-19 at 13.05.08.png
As you see, when I plug in USB 3.0 Pendrive to USB 3.0 Port(HS01) then non of SSxx appear this happen with HS05(USB 2.0)
In my config had
Screen Shot 2018-12-19 at 14.36.38.png
Screen Shot 2018-12-18 at 00.37.32.png
And newest USBInjectAll.kext
 
Hi everyone, I have followed https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/

At the discover port step, I had discover HS01 (USB 3.0 port), HS02 (USB 3.0 port), HS05 (USB 2.0 port), HS07 wifi card, HS09 HD cam, HS10 Card reader
View attachment 373612
Ok next step, I added -uia_exclude_hs uia_include=HS01,HS05
View attachment 373613
As you see, when I plug in USB 3.0 Pendrive to USB 3.0 Port(HS01) then non of SSxx appear this happen with HS05(USB 2.0)
In my config had
View attachment 373614
View attachment 373615
And newest USBInjectAll.kext

As written in the guide, you must use kernel flag -uia_exclude_hs in order to test SSxx ports (port limit issue).
Please read the guide again. Carefully.
 
As written in the guide, you must use kernel flag -uia_exclude_hs in order to test SSxx ports (port limit issue).
Please read the guide again. Carefully.
Yes, i had added kernel flag -uia_exclude_hs and then SS01-SS10 show up BUT PROBLEM is when I plug in USB 3.0 to USB 3.0 Port NONE of SSxxx show my usb ???
Next, we boot with -uia_exclude_hs uia_include=HS03 to test SSxx and USRx ports. Before testing, it looks like this:


After testing all ports with a USB3 device:

As you see, It's different from your picture when I plugged in

Screen Shot 2018-12-19 at 13.05.08.png
 
Yes, i had added kernel flag -uia_exclude_hs and then SS01-SS10 show up BUT PROBLEM is when I plug in USB 3.0 to USB 3.0 Port NONE of SSxxx show my usb ???


As you see, It's different from your picture when I plugged in

View attachment 373698
No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 

Attachments

  • debug_3107.zip
    6.4 MB · Views: 47

Attachments

  • debug_18558.zip
    6.3 MB · Views: 70
SR I forgot plug my USB this is my attached include USB 3.0 Pendrive plug and DT 101 G2 USB 2.0

Before proceeding any further, you need to fix your broken ACPI setup.
 
Before proceeding any further, you need to fix your broken ACPI setup.
Please make it clear I dont know "broken ACPI setup" is in my config or my dsdt/ssdt ?
 
Status
Not open for further replies.
Back
Top