- Joined
- Jan 9, 2020
- Messages
- 4
- Motherboard
- Gigabyte Z390 I Aorus Pro Wifi
- CPU
- i7-9700K
- Graphics
- HD 630
First time Hackintosh builder here, so please pardon my lack of knowledge.
I've spent the last two days trying to get my build working and I feel like I'm close but having a strange problem I can't solve. Catalina installs just fine, and when I boot into it using the USB drive that I installed from as the boot device, all of my USB ports work perfetcly.
Once I boot in, I run MultiBeast and it seems that no matter what kexts I install, USB3 simply doesn't work. I can plug my keyboard/mouse into ANY USB port and they work just fine, but no USB3 devices are recognized at all. I've tried following the instructions from several different threads here on the site (including mapping all of the ports as shown in this build), but I have had no luck.
The system runs great, it's very stable (heck, even the sleep functions work!) but this USB3 problem really has me scratching my head. Since it works when booting from the installer flash drive (created with UniBeast), does that mean that there is some base configuration used for Clover there that I can copy?
This (and audio - but the ALC1220 issue is a totally separate thing) are the last two hurdles I have before I reach the promised land. I appreciate any insight!
HW Info for reference:
Gigabyte Z390 I AORUS PRO WIFI (BIOS version F7)
i7-9700K
Intel HD 630
I've spent the last two days trying to get my build working and I feel like I'm close but having a strange problem I can't solve. Catalina installs just fine, and when I boot into it using the USB drive that I installed from as the boot device, all of my USB ports work perfetcly.
Once I boot in, I run MultiBeast and it seems that no matter what kexts I install, USB3 simply doesn't work. I can plug my keyboard/mouse into ANY USB port and they work just fine, but no USB3 devices are recognized at all. I've tried following the instructions from several different threads here on the site (including mapping all of the ports as shown in this build), but I have had no luck.
The system runs great, it's very stable (heck, even the sleep functions work!) but this USB3 problem really has me scratching my head. Since it works when booting from the installer flash drive (created with UniBeast), does that mean that there is some base configuration used for Clover there that I can copy?
This (and audio - but the ALC1220 issue is a totally separate thing) are the last two hurdles I have before I reach the promised land. I appreciate any insight!
HW Info for reference:
Gigabyte Z390 I AORUS PRO WIFI (BIOS version F7)
i7-9700K
Intel HD 630