Contribute
Register

[May 2020 UPDATE] USB SSDT for Z370M-DS3H (100% working)

Status
Not open for further replies.
Either 10.14.6 or 10.14.4 should be fine. Shouldn't make a difference.

Please download the attached file, unzip it, and copy it to the /EFI/CLOVER/drivers/UEFI/ folder. Then try booting again.
Stuck at same spot what about eNVMEe assert failed stopping clover?I was having trouble with this drive so tried to format it fat to erase efi then reformat it apfs but it just got stuck in utilities during install so I switched to another ssd drive.
 
Stuck at same spot what about eNVMEe assert failed stopping clover?I was having trouble with this drive so tried to format it fat to erase efi then reformat it apfs but it just got stuck in utilities during install so I switched to another ssd drive.

What kind of NVMe SSD are you using? Samsung 970 EVO Plus? Samsung PM981?
 
What kind of NVMe SSD are you using? Samsung 970 EVO Plus? Samsung PM981?
Intel 660P M.2 1TB which is messed up and a samsung 860 sata ssd 500gig removed name intel still stopped same place.
 
Last edited:
Intel 660P M.2 1TB which is messed up and a samsung 860 sata ssd 500gig removed name intel still stopped same place.

Please navigate to /EFI/CLOVER/kexts/Other/ and delete the following kexts:
Screen Shot 2019-08-13 at 2.36.14 PM.png


Other than this, I don't know what can help you boot...
 
Please navigate to /EFI/CLOVER/kexts/Other/ and delete the following kexts:
View attachment 421665

Other than this, I don't know what can help you boot...
Ok then one last thing please check my bios settings attached and maybe I need a older bios as one person on here said error module_start :1393 was a bios issue.
Thanks for all your help
 

Attachments

  • 7FXW%EykTo+B4qzFcjNdZw.jpg
    7FXW%EykTo+B4qzFcjNdZw.jpg
    2 MB · Views: 277
  • GPaFQc2cTRiM0ccdp9Bnsg.jpg
    GPaFQc2cTRiM0ccdp9Bnsg.jpg
    1.9 MB · Views: 287
  • 0pjqeGPVRPCJ7lgwihC+NQ.jpg
    0pjqeGPVRPCJ7lgwihC+NQ.jpg
    1.8 MB · Views: 295
  • IMG_0761.JPG
    IMG_0761.JPG
    2.3 MB · Views: 276
  • cL1Jl+WsQQWXxQRMkp3wUA.jpg
    cL1Jl+WsQQWXxQRMkp3wUA.jpg
    1.8 MB · Views: 281
  • 23eTkcHgQcuMQcjdJsdCbw.jpg
    23eTkcHgQcuMQcjdJsdCbw.jpg
    1.7 MB · Views: 264
  • XMUgnM8AS5mDAoupyQsZDA.jpg
    XMUgnM8AS5mDAoupyQsZDA.jpg
    1.7 MB · Views: 172
  • vq%ETJBRSY66M8n%ANrYOA.jpg
    vq%ETJBRSY66M8n%ANrYOA.jpg
    3.2 MB · Views: 295
Ok then one last thing please check my bios settings attached and maybe I need a older bios as one person on here said error module_start :1393 was a bios issue.
Thanks for all your help

Please try adding the following patch:
Screen Shot 2019-08-13 at 3.19.29 PM.png
 
I can't thank you enough finally got to utilities thank you so much .
robin

Awesome. I thought you said you downgraded your BIOS so it didn't occur to me that it could be a BIOS issue...

Anyway, you can put back the FakeSMC sensors in to your /EFI/CLOVER/kexts/Other/ folder. Also, do not install any hackintosh kexts to /Library/Extensions/.
 
SSDT for Gigabyte Z370M-DS3H.

Which BIOS version your MB has? I've read at another website that new versions starting from F10 were modified and SSDT compatibility issues possible.
(I plan to buy this MB for my new machine)
 
Status
Not open for further replies.
Back
Top