USB Required to boot

[Feronix]

Heya guys!

Just updated my old Hackintosh project from 1.6.8 (Snow Leopard) to Mavericks.
Most things didn't run very well under Snow Leopard as I had "newer" hardware. Now most things like audio and ethernet work natively. Still installed the drivers/kexts to make it work exactly like it's supposed to.

Only one problem; I still need my Unibeast drive to boot. I used the guide on the homepage and everything worked flawlessly, except for this part. I installed Chimera 2.2.1 via MultiBeast for Mavericks and later the standalone version from the download section, but neither seemed to help. I get some sort of Boot0 error.

I'm a complete noob so I'm stuck now, does anyone have any advice?
My specs are:
- Z77-DS3H
- i3 3225
- Intel HD 4000
- 2x4GB Kingston HyperX 1600MHz
- WD Caviar Blue 1Tb

Thanks in advance,
Rick

 

[P1LGRIM]

Try here : http://www.tonymacx86.com/25-boot0-error-official-guide.html

Good Luck

 

[Feronix]

Try here : http://www.tonymacx86.com/25-boot0-error-official-guide.html

Good Luck

You're a life saver man, works like a charm!