Contribute
Register

USB Audio Interface not working (Apogee One for iPad & Mac)

Status
Not open for further replies.
Joined
Mar 22, 2014
Messages
20
Motherboard
AsRock B360M-ITX/ac
CPU
i3-8100
Graphics
UHD 630
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
Hi there,

I've installed High Sierra and everything is working (also all USB ports) except my Audio device isn't recognised. I also have a Soundblaster Katana. It works absolutely fine. It's just the Apogee Audio Interface that isn't recognized at all :(.
That the Audio Interface is working fine is proven by connecting it to my Mac book Air where it runs like a charm. Any idea what I can do? Thank you very much in advance!

Here the product home page:
Audio Interface: http://www.apogeedigital.com/products/one/ipad
Motherboard: https://www.asrock.com/MB/Intel/B360M-ITXac/index.asp
 
Last edited:
I did this of course before opening that post
 
sure - you are right.
I have additionally tried following:

On the same hackintosh, I have booted with a linux live USB stick with LUBUNTU to check out if the audio device gets powered. And it does. So a power setting in BIOS cannot be the reason. It must be some kind of USB function in High Sierra that switches of the power for the audio device when high sierra loads. Further I have recognized, that until the clover OS selection menu appears, the USB audio device is powered. But then gets dark when high sierra loads. Any idea how to get this fixed?
 
Status
Not open for further replies.
Back
Top