- Joined
- Mar 23, 2016
- Messages
- 16
- Mac
- Classic Mac
- Mobile Phone
Question, for the USB POWER MANAGEMENT where do we put the three .aml files?
Mount the EFI partition and paste files to EFI/CLOVER/ACPI/PatchedQuestion, for the USB POWER MANAGEMENT where do we put the three .aml files?
Place AppleALC.kext into EFI/Clover/Kexts/Other and set Audio ID as 11 on your config.plist then restart your computer audio will work. Make sure to check the input audio in settings.Hi guys, I've this configuration:
H270N-WIFI
i7-7700
Crucial Ballistix Sport 8GB
I successfully got working Ethernet, Intel 630 but I can't get working audio. Tried with all the methods (MultiBeast and method two) an entire night and also Voodoo but it won't work.
Now I'm doing a new fresh install, may you suggest a new fresh method working with last version of Sierra? Thanks.
USB Power Management
Those who looking for the proper USB Power management go to this link.
For precompiled USB SSDT files click here. Note This is compiled for this motherboard if you have different motherboard then follow the above link.
Also, don’t forget to add patches in Kernel and Kext Patches–> Kext To Patch
- Name: com.apple.driver.usb.AppleUSBXHCIPCI
Find: 83bd74ff ffff10
Replace: 83bd74ff ffff1b
Comment: change 15 port limit to 26 in XHCI kext (100-series)- Name: AppleUSBXHCIPCI
Find: 837d8c10
Replace: 837d8c1b
Comment: Change 15 port limit to 24 in XHCI kext
Hi All, I have followed this guide twice now on 2 different installs, I had to move away from here the first time as trying to get audio to work which I did then stopped video from playing and I couldn't return as I had tried so many things I didn't realise that videos wouldn't play.
now I have started again carefully checking each time I try something but so far I have no luck with
audio no hardware found
video grey boot up screen everything flickering
when shut down or restart it freezes then eventually goes off
could anyone help so I can get this up and running? thanks
I have tried the 2 Audio methods listed in the thread and the inject intel removal and anything else that is listed there + other things I found in this thread only
I have this board - https://www.gigabyte.com/Motherboard/GA-Z270-Gaming-K3-rev-10#kf
I7 7700K
using the onboard 630 GT2 Graphics