Update Your Mavericks App to 10.9.2

[tonymacx86]

​

The original installation media for Mac OS X Snow Leopard was a 10.6 DVD. The DVD was only updated once to version 10.6.3. In order to provide more frequent updates to users, Apple is now slipstreaming the latest version of OS X directly into the download. Upon fresh installation, no updating is necessary!

​

If you downloaded Mavericks from the App Store prior to February 25, 2014, you most likely have 10.9 or 10.9.1. To re-download Mavericks and update your Installation App to 10.9.2, simply log into the Mac App Store and click Download. When the download finishes, the app will automatically open. The updated 10.9.2 Install OS X Mavericks App can be found in the Applications folder. You can then re-create your UniBeast installation USB.

Related Posts:
OS X 10.9.2 Update

 

[Ritey]

I used the fresh install approach and had great results. On one platform that all previous OS x versions would not allow sleep or the embedded bluetooth, 10.9.2 automatically detected the bluetooth, and now sleep works perfectly.

ASUS P8Z68-V Pro Gen3 (modded bios)

Used MultiBeast (without DSDT) to enable sound and trim.

Unibeast to create the App Store 10.9.2 installer.

Nvidia 650 Ti worked OOB.

OS x came up with Mac Pro 3.1 profile.

Going to install this on my main platform soon

Ritey ..

 

[Gregsound1]

I just successfully installed a fresh version of 10.9.2 on my first Hackintosh. Everthing besides integrated HDMI seems to be working. I wasn't able to get picture or sound through the on-board HDMI port. I'm using an dedicated card for video, witch installed without a hitch.

GA-H87N-Wifi
i5 4670
16GB Corsair Vengeance LP ram
Gigabyte GT 640 Graphics card
250GB Samsung Evo 840 SSD

 

[Blackote]

Article: Update Your Mavericks App to 10.9.2

Hey Greg,

Not too sure if your board has 2 HDMI ports, but I have the GA-Z87N-WIFI and using the top HDMI works. Try it out and it should work.

I just successfully installed a fresh version of 10.9.2 on my first Hackintosh. Everthing besides integrated HDMI seems to be working. I wasn't able to get picture or sound through the on-board HDMI port. I'm using an dedicated card for video, witch installed without a hitch.

GA-H87N-Wifi
i5 4670
16GB Corsair Vengeance LP ram
Gigabyte GT 640 Graphics card
250GB Samsung Evo 840 SSD

 

[krakhoria]

anyone just run the update on it's own or should i do a clean install?

 

[Ottoclav]

Does this mean that Apple could slowly be moving toward opening up their operating system for all hardware? It would be nice to get all the integrated wifi and video and sound to work.

 

[AntikytheraTech]

Article: Update Your Mavericks App to 10.9.2

anyone just run the update on it's own or should i do a clean install?

Yes, you can simply update your OS - I have been updating OS X via the app store since 10.8.3 with no problems (granted I fix permissions and have to run Multibeast to restore audio drivers, etc)

The purpose of updating the Mavericks app (and thereby updating your Unibeast flash drive) is so that you have an up-to-date rescue flash drive.

 

[DJ4MC]

I am about to build my first HackPro. I downloaded Mavericks last night and created my USB boot drive. I have to wait until all the parts come in to verify it actually installs 10.9.2.

As a side note I have a MacPro 3,1 with a GTX570 in it. I had to zap the NVRAM to get dual monitors back post updating to the new NVIDIA driver. (331.01.01f01) and the CUDA update

Here are my parts:


MB
253.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116901

RAM
379.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231590

SSD
399.99
http://www.newegg.com/Product/Product.aspx?Item=9SIA24G15X6366

Case
149.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16811139007

PS
129.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139010

Graphics
329.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16814121770

HD's (2)
329.98
http://www.newegg.com/Product/Product.aspx?Item=N82E16822236604

Should be a nice machine

Jules

 

[drsal]

I updated from the Apple Store from 10.9 to 10.9.2 for the second time. The first time I lost audio and I tried a number of audio drivers (usually Realtek DSDT free, ALC887/888b Current v100302 works) to no avail. I could try making an Unibeast 10.9.2 USB but that will take some time. Any suggestions?

Manuel

GA Z77-GS3H Rev 1.1
i7 3770
16 RAM
WD 1 T SATA
Sony Optiarc DVD
Geforce 650

 

[drsal]

I just finished updating from Mavericks 10.9 to 10.9.2 via Apple Store and for the second time I lost audio again. I tried several audio drivers including the original Realtek without DSDT ALC887/888b Current v. 100302 to no avail. I'm trying to avoid creating an USB Unibeast 10.9.2 to save time. Has anyone had the same problem and how did you fix it? Much obliged.

GA Z77- DS3H Rev. 1.1
i7- 3770
16 G Corsair RAM
1 T WD SATA
Ge Force 650