Contribute
Register

Update from 10.12.6 with GTX660Ti to 10.14.1 with RX 580

Joined
Feb 1, 2013
Messages
41
Motherboard
P8Z77-V
CPU
i5-3570
Graphics
RX 580
Hi! I have switched my gpu to RX 580 and installed mojave 10.14.1.
After update and to update, i can only boot if set Primary display in BIOS for iGPU, even if both monitors connected to RX 580. But if i want to change clover settings or BIOS, i have to connect monitor to iGPU.

When i set Primary display in BIOS for pciE GPU, as i used to with 10.12.6, system reboots after 80% progress bar at boot screen.
If boot in verbose mode, it also reboots, so i cant make photo of panic.

Please help(
 
Joined
Feb 1, 2013
Messages
41
Motherboard
P8Z77-V
CPU
i5-3570
Graphics
RX 580
WhateverGreen and lilu installed.

If i set primary display in BIOS to iGpu and disable Inject Intel in clover, system boots ok, but both monitors connected to RX 580 turns off after verbose boot log(no hdmi signal). I can enter password and play music in itunes from shortcuts without screens.

If i set primary display in BIOS to pciE Gpu and enable Inject Ati in clover, same problem, both monitors connected to RX 580 turns off after verbose boot log(no hdmi signal).

Only one way to boot with 2 monitors normal, is connect both monitors to RX 580, set primary display in BIOS to iGpu and enable Inject Intel in clover. But in this way i do not see clover menu and cant boot from another hdd and cant go to bios. (
 
Joined
Nov 8, 2014
Messages
119
Motherboard
Z370M DS3H
CPU
i5-8400
Graphics
RX 560
Mac
MacBook Pro
Mobile Phone
iOS
turn iGPU of completely and run system exclusively from RX580. No kext needed I think ...

no intel inject needed and make sure correct ig-platfrom-id
 
Joined
Feb 1, 2013
Messages
41
Motherboard
P8Z77-V
CPU
i5-3570
Graphics
RX 580
turn iGPU of completely and run system exclusively from RX580. No kext needed I think ...
Thank you
this is first what i tried, but
system reboots after 80% progress bar at boot screen

ig-platfrom-id
is it really needed? i didnt use it with gtx660ti and 10.12.6
CLOVER WIKI said:
This parameter is used to enable the internal Intel HD 4000 video card. Until now no common rule for selecting a value was found, so either let Clover handle this parameter or use another one if it does not work.
 
Joined
Feb 1, 2013
Messages
41
Motherboard
P8Z77-V
CPU
i5-3570
Graphics
RX 580
have you booted with -v to see where it stops?
sure, but it not stops, reboots immediately, even if in -v mode.

Now i find something. System boots ok without iGpu if i connect one monitor to display port of rx580 (via adapter dp to hdmi). looks like mojave do not like hdmi? If i connecter second monitor to hdmi in runtime, it has black screen.
 
Joined
Nov 8, 2014
Messages
119
Motherboard
Z370M DS3H
CPU
i5-8400
Graphics
RX 560
Mac
MacBook Pro
Mobile Phone
iOS
sure, but it not stops, reboots immediately, even if in -v mode.

Now i find something. System boots ok without iGpu if i connect one monitor to display port of rx580 (via adapter dp to hdmi). looks like mojave do not like hdmi? If i connecter second monitor to hdmi in runtime, it has black screen.
weird, my RX560 runs two screens just fine, one 4K dp and one 1080p HDMI
 
Joined
Feb 1, 2013
Messages
41
Motherboard
P8Z77-V
CPU
i5-3570
Graphics
RX 580
weird, my RX560 runs two screens just fine, one 4K dp and one 1080p HDMI
You are lucky)

I do not why, but rebootings are gone. Now with iGPU disabled:

Hdmi + hdmi or 1 hdmi = both monitors turns off at logon screen.
Display Port + hdmi = login ok with working 1 monitor, second monitor(hdmi) is on, but black screen, no image. System info shows 2 monitors.

@Macbooky please share your clover config.plist, thx
 
Top