- Joined
- Aug 16, 2015
- Messages
- 49
- Motherboard
- Dell Inspiron 7559
- CPU
- i7-6700HQ
- Graphics
- HD 530, GTX 960M, 1080p
First off after I heard about the fact that 10.4 contained skylake graphics frame buffer I decided to install the update. I also swapped the older config.plist that i had which was for intel HD 4000 I believe for the newer one for the HD 5xx series from RehabMan. I ran into the problem where it gave me a long error while booting about IGPU
[IGPU] Will fallback to host-side scheduling if graphics firmware fails to load
and someother things as well. I fixed this by changing the ID of my graphics to 0x191b0000, which is what was on PikeRAlpha's website and that solved the booting issue. Now that I am able to boot into OS X I was expecting to have QE/CI enabled but unfortunately not. I'm kinda stuck on what to do to enable QE/CI which I have read that other people have it enabled now and honestly i'm stuck. Any and all help would really be appreciated. In advance and from past issues, thanks to RehabMan and the Tonymacx86 community for all the help.
[IGPU] Will fallback to host-side scheduling if graphics firmware fails to load
and someother things as well. I fixed this by changing the ID of my graphics to 0x191b0000, which is what was on PikeRAlpha's website and that solved the booting issue. Now that I am able to boot into OS X I was expecting to have QE/CI enabled but unfortunately not. I'm kinda stuck on what to do to enable QE/CI which I have read that other people have it enabled now and honestly i'm stuck. Any and all help would really be appreciated. In advance and from past issues, thanks to RehabMan and the Tonymacx86 community for all the help.