Contribute
Register

UniBeast: Install macOS Sierra on Any Supported Intel-based PC

tonymacx86

Administrator
Staff member
Joined
Nov 17, 2009
Messages
7,365
Motherboard
Z370N WIFI
CPU
i7 8700K
Graphics
HD 630
Mac
  1. MacBook Air
Classic Mac
  1. Apple
  2. PowerBook
Mobile Phone
  1. iOS
sierraUB.png
The following guide is a complete walkthrough for updating to or installing a fresh version of macOS Sierra. It requires no experience and all of the basic installation and post-installation tools are available on tonymacx86.com.

Table of Contents
DownloadSierraicon.png Step 1: Download macOS Sierra
createUSB_icon.png
Step 2: Create a Bootable USB with UniBeast
UEFI_icon.png
Step 3: Recommended BIOS Settings
installElCap_icon.png
Step 4: Install macOS Sierra
mb_circle-sm.png Step 5: Post Installation with MultiBeast
mb_install.png
Troubleshooting and Optimizations


Before You Begin

1. Register here at tonymacx86! If you don't have a user account, create one!
2. Get our latest UniBeast and MultiBeast tools from the downloads section.
3. Purchase a 16GB or larger USB drive.
4. Do a full backup of your system. We strongly recommend performing a full backup of your existing system using Carbon Copy Cloner. By doing this, you can always go back to your working installation.

UniBeast is a tool that creates a bootable installer out of your downloaded version of macOS. In order to start fresh, you'll need access to a functional computer running OS X Lion 10.7.5 or later. This is a requirement, as you need access to the Mac App Store to download macOS and create the installation drive. To start from scratch, booting the 10.6 Snow Leopard Retail DVD directly, check out iBoot + MultiBeast.

Existing Clover users may do a direct update to macOS Sierra by simply running the Install macOS Sierra app as normal Mac users would. Follow these steps: Direct Update to macOS Sierra using Clover.

DownloadSierra.png

STEP 1: Download macOS Sierra
The full operating system is a free download for anyone who has purchased Mac OS X Snow Leopard, Lion, or Mountain Lion or has a Mac preloaded with OS X Mavericks, Yosemite, El Capitan, or macOS Sierra. Download the Application from the Mac App Store using your Apple ID on any Mac or functional computer running OS X 10.7.5 or later.

1. Open Mac App Store
2. Log in with your Apple ID
3. Download macOS Sierra

The Application Install macOS Sierra will appear in /Applications.


STEP 2: Create a Bootable USB Drive with UniBeast
Take a deep breath and take your time- this is pretty simple, but it's easy to miss things if you rush. Follow each step to the letter.

1. Insert the USB drive
2. Open /Applications/Utilities/Disk Utility
3. Highlight the USB drive in left column
Screen Shot 2016-09-12 at 9.36.54 AM.png
4. Click Erase button
5. For Name: type USB (You can rename it later)
6. For Format: choose OS X Extended (Journaled)
7. For Scheme: choose GUID Partition Map
Screen Shot 2016-09-12 at 9.37.44 AM.png
8. Click Erase then Done
Screen Shot 2016-09-12 at 9.41.33 AM.png
9. Download and run UniBeast
10. Click Continue, Continue, Continue, Continue, Agree
11. At Destination Select, choose USB and click Continue
Screen Shot 2016-09-27 at 9.58.43 AM.png
12. At Select OS Installation screen choose Sierra and click Continue
13. At Bootloader Options screen choose UEFI Boot Mode or Legacy Boot Mode. UEFI Boot Mode is recommended for 7/8/9/100 Series CustoMac desktops and all UEFI capable systems. Legacy Boot Mode is recommended for 5/6 Series CustoMac desktops and all BIOS based systems.
Screen Shot 2016-09-27 at 10.55.44 AM.png
14. (Optional) At Graphics Configuration screen choose the appropriate graphics option for your system and click Continue.
15. Verify installation options, then click Continue, enter password and click Install
Screen Shot 2016-09-27 at 10.56.00 AM.png
UniBeast will now create the bootable USB drive. The process will only take about 10 minutes, depending on system and drive speed. Do not unplug or stop during this time.
16. Drag MultiBeast to your completed USB drive.

Clover Note: UniBeast delivers basic bootloader support based on our testing on recommended CustoMac systems. For further bootloader customization, download and run the official Clover package. Advanced users may also compile Clover by downloading the full source.

112836-9138584fd7536cb04487d99acc497a9b.jpg

STEP 3: Recommended BIOS Settings
If you're installing on a recommended CustoMac desktop with AMI UEFI BIOS, the options are simple. For other systems make sure to set your BIOS to Optimized Defaults, and your hard drive to AHCI mode. Here are standard AMI UEFI BIOS settings for Gigabyte AMI UEFI BIOS, Gigabyte AWARD BIOS, ASUS AMI UEFI BIOS, and MSI AMI UEFI BIOS.

1. To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
2. Load Optimized Defaults
3. If your CPU supports VT-d, disable it
4. If your system has CFG-Lock, disable it
5. If your system has Secure Boot Mode, disable it
6. Set OS Type to Other OS
7. If your system has IO SerialPort, disable it
8. Set XHCI Handoff to Enabled
9. If you have a 6 series or x58 system with AWARD BIOS, disable USB 3.0
10. Save and exit.

installSierra.png

STEP 4: Install macOS Sierra
You're almost done! All you need to do is boot from the USB drive and install! For best results, insert the USB in a USB 2.0 port.

1. Turn on the computer
2. Press the hotkey to choose boot device (usually F12, F11, F10, or F8)
3. Choose USB
4. At Clover boot screen, choose Boot Mac OS X from USB
5. When you arrive at the Installer, choose language.

If you have issues reaching the installer, you can use spacebar on boot screen to enter alternate boot modes such as verbose and safe mode.
For more instructions on entering boot flags see Clover Basics and Switching Advice.


6. For a new installation of macOS, you MUST erase and format the destination drive according to the following steps before continuing.

a. In the top menu bar choose Utilities, and open Disk Utility
b. Highlight your target drive for the Sierra installation in left column.
c. Click Erase button
d. For Name: type Sierra (You can rename it later)
e. For Format: choose OS X Extended (Journaled)
f. For Scheme: choose GUID Partition Map
g. Click Erase
h. Close Disk Utility
7. When the installer asks you where to install, choose Sierra, or your existing install.
8. Upon completion, the system will automatically restart.
121805-d4862f5cdaaf88f11ebd6b6ad590f213.jpg

STEP 5: Post Installation with MultiBeast
MultiBeast is an all-in-one post-installation tool designed to enable boot from hard drive, and install support for Audio, Network, and Graphics. The installation is complete, but the drive isn't bootable yet. Boot from the USB again, this time choosing Sierra.

1. Turn on the computer
2. Press the hotkey to choose boot device
3. Choose USB
4. At the Boot Screen, choose your new Sierra installation.
5. Complete macOS Sierra setup
6. Open and run MultiBeast
7. If this is a fresh installation, click Quick Start. UEFI Boot Mode is recommended for 7/8/9/100 Series CustoMac desktops and all UEFI capable systems. Legacy Boot Mode is recommended for 5/6 Series CustoMac desktops and all BIOS based systems.
8. Choose the appropriate audio and network options for your system:
Screen Shot 2016-09-27 at 9.52.46 AM.png
9. Click Customize for further options
Screen Shot 2016-09-27 at 9.53.01 AM.png
10. Click Print or Save to back up your configuration
11. Click Build then Install
Screen Shot 2016-09-27 at 9.53.36 AM.png
If using a NVIDIA 'Maxwell' GeForce GTX 750, 750 Ti, 950, 960, 970, 980, 980 Ti, or TITAN X graphics card, macOS Sierra graphics drivers are not natively supported. Alternate NVIDIA drivers are required.

12. (Optional) Download and install Alternate NVIDIA Graphics Drivers
13. Reboot
screenshot0.png

SierraDesktop.png

Yay! You now have a fully updated bootable version of macOS Sierra on your CustoMac! And a super handy USB rescue drive. It's easy to get frustrated, but don't give up! If you get stuck, there are many users with similar hardware in the tonymacx86 Forum to provide support.

Thanks to all of the hard working developers, hackers, and testers all over the world without whom this guide would never have been possible.


Troubleshooting and Optimizations:
After you've completed the guide, things such as HDMI audio and iMessage may not work automatically. The list below should serve to fully optimize your system after initial setup. This list will be updated.

Direct Update to macOS Sierra Using Clover
Clover Basics and Switching Advice
Some Broadcom mini-PCIe Devices Unsupported in macOS Sierra
macOS Sierra Does NOT Boot with MacPro3,1 MacPro4,1 System Definitions

New Method for Enabling NVIDIA Web Drivers in Clover
Big List of Solutions for El Capitan Install Problems
How to Fix iMessage
An iDiot's Guide To iMessage
[README] Common (some unsolved) Problems in 10.12 Sierra
New Automatic HDMI Audio Script Released
Quick Guide to Generate a SSDT for CPU Power Management
Solving NVIDIA Driver Install & Loading Problems
CustoMac Desktop USB Fixes - OS X 10.11 El Capitan - Reference
Create a Clover Test USB Using UniBeast
How to Enter/Edit Boot Flags in Clover
How to Edit Clover config.plist
How to Mount EFI Partition
How to Set Clover to Automatically Boot System Drive
[GUIDE] Remove extra Clover BIOS boot entries & prevent further problems
OS X Configuration, Tuning & Utility Tools
How To Show Hidden Files in Finder
[Guide] Airport - PCIe Half Mini v2
Continuity and Handoff Capable Apple Mini Cards + PCIe and mini-PCIe Adapters
Laptop Compatibility
[READ ME FIRST!] Graphics Setup & Troubleshooting
The Basics

Alternate NVIDIA Graphics Drivers
NVIDIA releases alternate graphics drivers separately on the web for each build of macOS. These are different from the drivers Apple ships as standard, and should be considered experimental. In the past, the drivers have been known to solve OpenCL issues with certain applications, as well as providing better native GPU power management for certain devices. These drivers are currently the only method to get full acceleration for GeForce GTX 1050, 1050 Ti, 1060, 1070, 1080, 1080 Ti, TITAN Pascal, and TITAN Xp 'Pascal' graphics cards and NVIDIA GeForce GTX 750, 750 Ti, 950, 960, 970, 980, 980 Ti, and TITAN X 'Maxwell' graphics cards. There are no current Macs with these cards, so support is absent natively in macOS.

https://www.tonymacx86.com/threads/...for-macos-sierra-10-12-6-378-05-05-25.227494/

Clover Bootloader Credits
UniBeast contains and delivers files from the Clover EFI Bootloader project. For more information and sources used see Clover EFI bootloader. Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox. The main is EDK2 latest revision.

Clover Note: UniBeast delivers basic bootloader support based on our testing on recommended CustoMac systems. For further bootloader customization, download and run the official Clover package. Advanced users may also compile Clover by downloading the full source.

Clover Developers:
Slice, with help of Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman…

Source code credits:
Intel, Apple, Oracle, Chameleon, rEFIt and Xom.

Clover Source and Downloads:
Sourceforge: Clover
 
Last edited:
Thank you so much for releasing this handy tools :D

need sound for ALC 1150 using HD 530 hdmi what should i select @tonymacx86
 
what about skylake 6500u on laptop
 
Back
Top