UniBeast: Install macOS Sierra on Any Supported Intel-based PC

[JoaoTabuasSantos]

Hi!
I need help! I created the usb installer with unibeast and I can boot it to the installation part, but it always stucks during the installation.
I tried different usb sticks, and to download the sierra installer and the unibeast again, nothing worked.
I'll leave here the picture of the error I get.
Can someone help me please?

 

[goosehole]

Hi chaps/ chapettes.

Totally new to all of this...Hi!

Just got a custom built tower (info should be under my avatar, though I can't see it :/ )

Basically:

• Intel Core i7 7700 Quad Core 3.6GHz Processor
• 16GB DDR4 2133MHz
• 240GB SSD
• 3TB 3.5" 7200rpm SATA Hard Drive
• PNY Quadro K620 2GB GDDR3
• Gigabyte GA-H110M-S2H Motherboard

Should this configuration work with the installion guide?

Many Thanks,
goosehole

 

[BreBo]

Should this configuration work with the installion guide?

Please note that your Kaby Lake CPU is not natively supported in macOS.
The CPU requires a FakeCPUID (with Skylake ID) to boot.

• [NEW / TESTING] Intel 7th Generation Kaby Lake CPUs + 200 Series Motherboards in macOS

 

[bruno03]

Hy , I have early 2008 MacBook and Lion 10.7.5 on it. I tried to download macOS Sierra but it says that my Mac aint compatible. What to do?

 

[JoaoTabuasSantos]

Hi!
I need help! I created the usb installer with unibeast and I can boot it to the installation part, but it always stucks during the installation.
I tried different usb sticks, and to download the sierra installer and the unibeast again, nothing worked.
I'll leave here the picture of the error I get.
Can someone help me please?
View attachment 251045

Someone please?!

 

[Feartech]

Someone please?!

create a new thread, this is not a help thread

 

[goosehole]

Please note that your Kaby Lake CPU is not natively supported in macOS.
The CPU requires a FakeCPUID (with Skylake ID) to boot.

• [NEW / TESTING] Intel 7th Generation Kaby Lake CPUs + 200 Series Motherboards in macOS

Ahh! Right, I see. Thanks very much for your response, I will give this a go :]

I'm also wondering if the installation goes wrong, it won't negatively effect the hardware or anything like that? I can always just install Windows and figure it out at a later date?

Thanks again.

 

[BlackSlash]

Ok I think I made a mistake after installing macOS Sierra to the letter, I decided to enable disk encryption and now I have the circle with the back slash through it similar to the black one down the bottom only white can this be fixed or will I have to erase the drive and start again. I for got to mention recovery just hangs.

edit dated 1 May 2017: And now I have this after 19hrs 24 minutes of waiting time to see what would happen and got the following message
gIOConsoleUser: gIOScreenLockState 3, hs 0, now 0, sn 0x0

I have decided to give up any one want a free computer its out on the front lawn....

 

[TomAlex]

Hi!

Managed to install Sierra after playing with a ton of boot flags in Clover. This is what finally go me into installer without garbled image.
-v -f -F -x GraphicsEnabler=Yes
(Intel HD40000 not injected)

And this got me nice resolution:
(Intel HD40000 injected, Edid injected, no extra boot flags needed)

Anyway, ran Multibeast, but I am not getting a bootable disk without USB. What can I do?

Spec:
-P8Z77-I Deluxe
-i5-3570K Processor (Intel HD40000)
-Intel® SSD 330 Series 180GB 2.5", 25nm
-Corsair Vengeance DDR3 1600MHz 16GB CL9

 

[jay1111]

i got below error after follow last step of installing drivers and fakesmc any idea why its getting
Hardwares:
Intel Corei3 6th gen
Asus m110h-d motherboard. 6th generation
256 ssd harddrive
8Gb Ram