Contribute
Register

UniBeast: Install macOS Sierra on Any Supported Intel-based PC

I got Sierra running, but then i remove a kext and am unable to boot in.

How do I install a kext (located in my Desktop) via terminal (using my installer)?

cd /volumes/MacOS(my nvme drive name)
cd /
ls

HackrNVMeFamily.kext (located on Desktop)

is as far as i can get to.

tried sudo cp -r HackrNVMeFamily.kext /System/Library/Extensions/
with no success
 
Mac Pro 6,1 System Definition Working flawlessly with my new Skylake system( GA-170x UD5 and Intel i7 6700k)
and MacOS 10.12.1. It need now extra kext. Works with the ones I used in 14.2 and 17.1. I can feel and see the positive difference.

Now my CD Drive works, it eject with the keyboard button. It boot a little faster (Very noticeable),
All my USB 3.0 ports and the USB 3.1 port works.

There could be more benefits, but i am not a hackintosh expert. And I am not even sure if this was reported already.

I triedMac Pro 6,1 because i didn't like the iMac,s. I love the Mac Pro idea.

I change my system def from 17.1 to mac Pro 6.1 and it worked without any problem.

so I did a clean Vanilla installation method to make sure my software all work perfect.

See attachments
 

Attachments

  • Screen Shot 2016-11-05 at 2.19.39 AM.png
    Screen Shot 2016-11-05 at 2.19.39 AM.png
    97.5 KB · Views: 239
  • Screen Shot Hardware overview.png
    Screen Shot Hardware overview.png
    162.7 KB · Views: 221
  • Screen Shot Hardware overview 1.png
    Screen Shot Hardware overview 1.png
    201.4 KB · Views: 260
  • Screen Shot Hardware overview 2.png
    Screen Shot Hardware overview 2.png
    163.9 KB · Views: 217
I am stuck and not sure what to do. I created the usb and when I boot with the usb it gets about halfway through the apple logo load and then the screen goes blank and nothing. I created another usb drive and I am getting the same results. Any ideas?

Thanks in advance


i5 6500
ga-h170-wifi
crucial RAM
crucial SSD
 
I got Sierra running, but then i remove a kext and am unable to boot in.

How do I install a kext (located in my Desktop) via terminal (using my installer)?

cd /volumes/MacOS(my nvme drive name)
cd /
ls

HackrNVMeFamily.kext (located on Desktop)

is as far as i can get to.

tried sudo cp -r HackrNVMeFamily.kext /System/Library/Extensions/
with no success


Nvm ladys and gents! figured it out and back in business!
 
Hello everyone! I just created the USB for Sierra and when I go to Disk Utilities I only see my 2 HDDs, and none of my SSDs. Two of them are in RAID 1. I don't know if anyone else has/had this problem, but any help would be much appreciated. Thanks! :)
 
Any advice why my bootable usb does not fire up?
Only relatable setup that I found in bios was sata mode -> ahci.

I'm trying to building a small multimedia pc with Sierra.
Should it work with the following setup or should I stop trying?

HDD: Kingston 120 gb ssd
MB: Asus p8h67-i mini itx
CPU: Intel i3-2100T
 
Back
Top