- Joined
- May 18, 2019
- Messages
- 7
- Motherboard
- Gigabyte GA-H67M-D2
- CPU
- i5-2310
- Graphics
- GTX 960
- Mac
- Mobile Phone
Hi!
Making the USB installer with Unibeast 8.3.1 hangs after copying files when it's installing the bootloader.
I have investigated the log and found out it said that the partition scheme of the destination disk is not correct.
I have erased my whole USB several times with both GPT and MBP scheme and the same error appeared.
Here is some info:
12/09/19 15:18:49 - Copying Files...
12/09/19 15:28:11 - Installing Bootloader...
12/09/19 15:28:38 - installer: Package name is Clover v2.4k r4428 tonymacx86 UniBeast Legacy
installer: Installing at base path /Volumes/Install macOS High Sierra
installer: The install failed. (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance. An error occurred while running scripts from the package “Clover_v2.4k_r4428-Legacy-UB.pkg”.)
err
12/09/19 15:28:38 - installer --- installer: Package name is Clover v2.4k r4428 tonymacx86 UniBeast Legacy
installer: Installing at base path /Volumes/Install macOS High Sierra
installer: The install failed. (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance. An error occurred while running scripts from the package “Clover_v2.4k_r4428-Legacy-UB.pkg”.)
err --- Couldn't install Bootloader
7. Contents of install.log
2019-12-09 15:28:36+08 Wongde-MacBook-Pro installd[667]: PackageKit: Executing script "./postinstall" in /private/tmp/PKInstallSandbox.I380il/Scripts/org.clover.efifolder.0SeueG
2019-12-09 15:28:36+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ===============================================
2019-12-09 15:28:36+08 Wongde-MacBook-Pro installd[667]: ./postinstall: EFIFolder Post-Install Script
2019-12-09 15:28:36+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ===============================================
2019-12-09 15:28:36+08 Wongde-MacBook-Pro installd[667]: ./postinstall: /Volumes/Install macOS High Sierra/EFI/CLOVER/config-sample.plist -> /Volumes/Install macOS High Sierra/EFI/CLOVER/config.plist
2019-12-09 15:28:36+08 Wongde-MacBook-Pro installd[667]: PackageKit: Executing script "./postinstall" in /private/tmp/PKInstallSandbox.I380il/Scripts/org.clover.bootloader.boot0af.rgUzjn
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: Boot Volume is /Volumes/Install macOS High Sierra
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ===============================================
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: Installer Variables:
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ********************
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: bootvolume: Volume is /Volumes/Install macOS High Sierra
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: bootdev: Volume device is /dev/disk2s1
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: bootrdev: Volume raw device is /dev/rdisk2s1
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: bootslice: Volume slice is 1
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: bootdisk: Disk device is /dev/disk2
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: bootrdisk: Disk raw device is /dev/rdisk2
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: diskloader: Disk loader is boot0af
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: partitionloaderhfs: Partition loader is boot1h
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: partitionloaderfat: Partition loader is boot1f32
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: partitionloaderexfat: Partition loader is boot1x
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: -----------------------------------------------
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ===============================================
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: Check partition scheme of /dev/disk2
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ===============================================
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: /tmp/PKInstallSandbox.I380il/Scripts/org.clover.bootloader.boot0af.rgUzjn/postinstall: line 88: /Volumes/Install macOS High Sierra/usr/local/bin/partutil: Bad CPU type in executable
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ERROR: /dev/disk2s1 use an unsupported partition scheme:
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: 1
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: PackageKit: releasing backupd
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: PackageKit: allow user idle system sleep
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: PackageKit: Cleared responsibility for install from 2673.
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “Clover_v2.4k_r4428-Legacy-UB.pkg”." UserInfo={NSFilePath=./postinstall, NSURL=file:///var/folders/n9/cfkz1zzn4hn3tk1hjd0s4qxw0000gn/T/AppTranslocation/4D81CD25-383F-47C4-B6B4-7F2976A704B9/d/UniBeast.app/Contents/Resources/Clover_v2.4k_r4428-Legacy-UB.pkg#boot0af.pkg, PKInstallPackageIdentifier=org.clover.bootloader.boot0af, NSLocalizedDescription=An error occurred while running scripts from the package “Clover_v2.4k_r4428-Legacy-UB.pkg”.} {
NSFilePath = "./postinstall";
NSLocalizedDescription = "An error occurred while running scripts from the package \U201cClover_v2.4k_r4428-Legacy-UB.pkg\U201d.";
NSURL = "file:///var/folders/n9/cfkz1zzn4hn3tk1hjd0s4qxw0000gn/T/AppTranslocation/4D81CD25-383F-47C4-B6B4-7F2976A704B9/d/UniBeast.app/Contents/Resources/Clover_v2.4k_r4428-Legacy-UB.pkg#boot0af.pkg";
PKInstallPackageIdentifier = "org.clover.bootloader.boot0af";
}
Making the USB installer with Unibeast 8.3.1 hangs after copying files when it's installing the bootloader.
I have investigated the log and found out it said that the partition scheme of the destination disk is not correct.
I have erased my whole USB several times with both GPT and MBP scheme and the same error appeared.
Here is some info:
- UniBeast version: 8.3.1
- UniBeast choices: High sierra
- USB partition scheme, GPT or MBR and size of the destination partition: GPT and MBR, 16GB USB
- System specifics where UniBeast was run including hardware configuration and macOS version: MacBook Pro (15-inch, 2017), MacOS Catalina Version 10.15.1 (19B88)
- Error message: Only Error message from the Log, the Unibeast stuck at the screen "Installing Bootloader
- Contents of UniBeast.log:
12/09/19 15:18:49 - Copying Files...
12/09/19 15:28:11 - Installing Bootloader...
12/09/19 15:28:38 - installer: Package name is Clover v2.4k r4428 tonymacx86 UniBeast Legacy
installer: Installing at base path /Volumes/Install macOS High Sierra
installer: The install failed. (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance. An error occurred while running scripts from the package “Clover_v2.4k_r4428-Legacy-UB.pkg”.)
err
12/09/19 15:28:38 - installer --- installer: Package name is Clover v2.4k r4428 tonymacx86 UniBeast Legacy
installer: Installing at base path /Volumes/Install macOS High Sierra
installer: The install failed. (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance. An error occurred while running scripts from the package “Clover_v2.4k_r4428-Legacy-UB.pkg”.)
err --- Couldn't install Bootloader
7. Contents of install.log
2019-12-09 15:28:36+08 Wongde-MacBook-Pro installd[667]: PackageKit: Executing script "./postinstall" in /private/tmp/PKInstallSandbox.I380il/Scripts/org.clover.efifolder.0SeueG
2019-12-09 15:28:36+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ===============================================
2019-12-09 15:28:36+08 Wongde-MacBook-Pro installd[667]: ./postinstall: EFIFolder Post-Install Script
2019-12-09 15:28:36+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ===============================================
2019-12-09 15:28:36+08 Wongde-MacBook-Pro installd[667]: ./postinstall: /Volumes/Install macOS High Sierra/EFI/CLOVER/config-sample.plist -> /Volumes/Install macOS High Sierra/EFI/CLOVER/config.plist
2019-12-09 15:28:36+08 Wongde-MacBook-Pro installd[667]: PackageKit: Executing script "./postinstall" in /private/tmp/PKInstallSandbox.I380il/Scripts/org.clover.bootloader.boot0af.rgUzjn
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: Boot Volume is /Volumes/Install macOS High Sierra
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ===============================================
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: Installer Variables:
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ********************
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: bootvolume: Volume is /Volumes/Install macOS High Sierra
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: bootdev: Volume device is /dev/disk2s1
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: bootrdev: Volume raw device is /dev/rdisk2s1
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: bootslice: Volume slice is 1
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: bootdisk: Disk device is /dev/disk2
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: bootrdisk: Disk raw device is /dev/rdisk2
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: diskloader: Disk loader is boot0af
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: partitionloaderhfs: Partition loader is boot1h
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: partitionloaderfat: Partition loader is boot1f32
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: partitionloaderexfat: Partition loader is boot1x
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: -----------------------------------------------
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ===============================================
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: Check partition scheme of /dev/disk2
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ===============================================
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: /tmp/PKInstallSandbox.I380il/Scripts/org.clover.bootloader.boot0af.rgUzjn/postinstall: line 88: /Volumes/Install macOS High Sierra/usr/local/bin/partutil: Bad CPU type in executable
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: ERROR: /dev/disk2s1 use an unsupported partition scheme:
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: ./postinstall: 1
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: PackageKit: releasing backupd
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: PackageKit: allow user idle system sleep
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: PackageKit: Cleared responsibility for install from 2673.
2019-12-09 15:28:37+08 Wongde-MacBook-Pro installd[667]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “Clover_v2.4k_r4428-Legacy-UB.pkg”." UserInfo={NSFilePath=./postinstall, NSURL=file:///var/folders/n9/cfkz1zzn4hn3tk1hjd0s4qxw0000gn/T/AppTranslocation/4D81CD25-383F-47C4-B6B4-7F2976A704B9/d/UniBeast.app/Contents/Resources/Clover_v2.4k_r4428-Legacy-UB.pkg#boot0af.pkg, PKInstallPackageIdentifier=org.clover.bootloader.boot0af, NSLocalizedDescription=An error occurred while running scripts from the package “Clover_v2.4k_r4428-Legacy-UB.pkg”.} {
NSFilePath = "./postinstall";
NSLocalizedDescription = "An error occurred while running scripts from the package \U201cClover_v2.4k_r4428-Legacy-UB.pkg\U201d.";
NSURL = "file:///var/folders/n9/cfkz1zzn4hn3tk1hjd0s4qxw0000gn/T/AppTranslocation/4D81CD25-383F-47C4-B6B4-7F2976A704B9/d/UniBeast.app/Contents/Resources/Clover_v2.4k_r4428-Legacy-UB.pkg#boot0af.pkg";
PKInstallPackageIdentifier = "org.clover.bootloader.boot0af";
}