Contribute
Register

Unibeast 6.1 doesn't work on Ga-H97N-WIFI (fixed)

Status
Not open for further replies.
Joined
Jul 30, 2014
Messages
6
Motherboard
GA-H97N-WIFI
CPU
i5-4690
Graphics
HD 4600
Mac
  1. MacBook Pro
Classic Mac
  1. 0
Mobile Phone
  1. Android
After trying to install OS X with unibeast 6.1 just quit....did succeed though using

1 - Format USB
2 - Use command line to make a USB OS X installer
3 - Use clover configurator to mount the EFI partition
4 - Use the clover special edition from insane Mac forum, add the HD4600 to get intel graphics working right away

I'm using software Raid 10 on my system.

Install the fakesmc after

Still working on enabling audio

Unibeast 6.1 has so many different settings, is making kernel panic at ACPI level all the time.
 
:headbang: I have the similar configuration and it works like a charm. I have prepared the unibeast with no graphics injection. Please try it the way I followed, simple.
1.Flash BIOS with latest (version F8)
2. Reset Bios setting to Optimize to default.
3.Prepare Unibeast With UEFI and No Graphics Injection.
4. Boot using USB and install it.
5. After INstallation again Boot with USB and install clover-UEFI(Post installation tools) and Custom Essential Kexts.
6.Install Audio kexts from Command script.
7.Configure Clover from Config.plist located in EFI->EFI->Clover->Config.plist.
8.In the Gaphics Tab check IntelFix. Save on exit and restart the computer. This is what I did and My El-capitan works fine now.
 
Can you send me your clover config file? I wonder what options you have enabled......

Regards,
 
Please recreate your USB using UniBeast 6.0.1- 6.1 had bugs and was pulled. Apologies for the inconvenience.
 
Status
Not open for further replies.
Back
Top