Unibeast 3.0.1 Maverick install rebootloop after Apple boot screen

[tebogo]

Make sure you create your Unibeast USB with "Laptop Support" This adds PS2 drivers so your internal keyboard/trackpad works.

I did that but no result. Still have only keyboard working, no mouse no trackpad.
I'm a little stuck now

Any tips?

 

[RehabMan]

I did that but no result. Still have only keyboard working, no mouse no trackpad.
I'm a little stuck now

Any tips?

I wonder if your trackpad is on the USB bus?

Try EHCIacquire=Yes EHCIhard=Yes and/or USBBusFix=Yes

 

[tebogo]

I wonder if your trackpad is on the USB bus?

Try EHCIacquire=Yes EHCIhard=Yes and/or USBBusFix=Yes

Hello RehabMan,

All combinations of the bootflags mentioned and -x end in OSX install screen without trackpad or USB-mouse.
But with no boot flags I end in the Apple boot screen with trackpad wording, no USB-mouse.

With only -v the boot process stops with: SMC::smcReadyKeyAction ERROR: kSMCReadKe
See picture. So it looks like I need to boot without -x to get trackpad working?

Can you help me further?

 

[tebogo]

Strange, I booted a last time with only -v and now it works including touchpad.
Installing Mavericks now, fingers crossed.

 

[RehabMan]

So it looks like I need to boot without -x to get trackpad working?

Correct. PS2 drivers are not marked safe-boot. So they will not load with "-x"...

 

[tebogo]

Oké, I managed to install Mavericks on harddisk, and I can boot it using the Unibeast-USB stick.
But first configuration has same problem again.

With -x -v I get. in the Welcome screen, without touchpad and USB mouse.
With only -v I get the following boot end.


The other bootflags EHCIhard and EHCIacquire did not do a thing.

Please help with other suggestions.

Thanx

 

[RehabMan]

Oké, I managed to install Mavericks on harddisk, and I can boot it using the Unibeast-USB stick.
But first configuration has same problem again.

With -x -v I get. in the Welcome screen, without touchpad and USB mouse.
With only -v I get the following boot end.


The other bootflags EHCIhard and EHCIacquire did not do a thing.

Please help with other suggestions.

Thanx

It is a graphics problem. Try an HDMI monitor, graphics related boot flags, or remove the graphics Kexts.

 

[tebogo]

Thank you for the reply.

So you would say de HD 4400 is the problem?

I can't connect a external monitor (vga, dvi, HDMI, display-port) so that is not a option.

I can't find a boot-flag to pass this problem.
Which kext would you suggest to remove, and how to?

Thank you.

 

[tebogo]

Thank you for the reply.

So you would say the HD 4400 is the problem?

I can't connect a external monitor (vga, dvi, HDMI, display-port) so that is not a option.

I can't find a boot-flag to pass this problem.
Which kext would you suggest to remove, and how to?

Thank you.

 

[tebogo]

Thank you for the reply.

So you would say the HD 4400 is the problem?

I can't connect a external monitor (vga, dvi, HDMI, display-port) so that is not a option.

I can't find a boot-flag to pass this problem.
Which kext would you suggest to remove, and how to?

Thank you.

Does HD 4400 will be supported in Mavericks? Is someone working on this?

Please help. I'm stuck