Unibeast 3.0.1 Maverick install rebootloop after Apple boot screen

[tebogo]

All,

I bought this laptop Medion Akoya S6212T
Specs: http://aldi.medion.com/md99270/nl/?refPage=medion#ausstattung_anker

I made a unibeast boot stick as in guide described. No problems in that.
After boot from de unibeast USB stick I see the chimera boot screen.
I can enter special boot options, like grahphicsEnabler=yes etc.
All sort of bootflags i tried all end in reboot of laptop.
I do see the Apple boot screen, but after that the laptop reboots immediatly.

I have two other hackintosh machines (SL and MT) with no problems, but here i'm stuck.

Please help me.

 

[XMYUKON]

All,

I bought this laptop Medion Akoya S6212T
Specs: http://aldi.medion.com/md99270/nl/?refPage=medion#ausstattung_anker

I made a unibeast boot stick as in guide described. No problems in that.
After boot from de unibeast USB stick I see the chimera boot screen.
I can enter special boot options, like grahphicsEnabler=yes etc.
All sort of bootflags i tried all end in reboot of laptop.
I do see the Apple boot screen, but after that the laptop reboots immediatly.

I have two other hackintosh machines (SL and MT) with no problems, but here i'm stuck.

Please help me.

Boot with -v and take a picture of where it stops, and upload it here. You should try "GraphicsEnabler=No" and "-x" those two always will seem to work.

 

[tebogo]

That's the problem, boot does not stop. So i can't take a picture. It just reboots.
The -x and GraphicsEnabler=No as other bootflags I already tried lots of times.

Of you can tell me how to pauze, e.g. Ctrl^z i'll make a photo!

Thanks!

 

[RehabMan]

That's the problem, boot does not stop. So i can't take a picture. It just reboots.
The -x and GraphicsEnabler=No as other bootflags I already tried lots of times.

Of you can tell me how to pauze, e.g. Ctrl^z i'll make a photo!

Thanks!

See here: http://www.tonymacx86.com/mavericks...-locked-msrs-hp-envy-15-j063cl-i7-4700mq.html

 

[tebogo]

See here: http://www.tonymacx86.com/mavericks...-locked-msrs-hp-envy-15-j063cl-i7-4700mq.html

Thanks, i'll try you kernel.

By the way, using the Pause-key you can stop and start the scrolling information with bootflag -v.
Very handy ;-)

 

[RehabMan]

Thanks, i'll try you kernel.

By the way, using the Pause-key you can stop and start the scrolling information with bootflag -v.
Very handy ;-)

Yes, good ol' real-mode IRQ1 (keyboard) interrupt handler. Has been in the PC since the beginning of time...

 

[tebogo]

Thanx, this did the trick.

Now have problem with USB, i'll make a new unibeast-key with USB-legacy support.

Or do you something else?

Thank you!

 

[RehabMan]

Thanx, this did the trick.

Now have problem with USB, i'll make a new unibeast-key with USB-legacy support.

Or do you something else?

Thank you!

I would avoid a USB rollback.

Take a look at ioreg with IORegistryExplorer to see what is loading against EHC1/EHC2 and XHC. Also check system.log for USB(EHC/XHC) related errors.

 

[tebogo]

Thanks for the reaction.
The problem is that I can't install Maverick without USB-Mouse support….
So I can't check what is loading and system.log….

I'll try further and come back with results.

 

[RehabMan]

Thanks for the reaction.
The problem is that I can't install Maverick without USB-Mouse support….
So I can't check what is loading and system.log….

I'll try further and come back with results.

Make sure you create your Unibeast USB with "Laptop Support" This adds PS2 drivers so your internal keyboard/trackpad works.