<< Solved >> Unable to insatall high seirra

[Midniteb0ne]

I tried installing macOS seirra using unibeast and multibeast, it worked like a charm.

I when I try to install high seirra I get the prohibitory sign.
My specs are
i5 6500
Asus h170 gaming pro
GTX 960 4gb
Corsair vengence 8gb ram

 

[Midniteb0ne]

I tried installing macOS seirra using unibeast and multibeast, it worked like a charm.

I when I try to install high seirra I get the prohibitory sign.
My specs are
i5 6500
Asus h170 gaming pro
GTX 960 4gb
Corsair vengence 8gb ram

I get the prohibitory sign after the progress bar reaches about 75%

 

[BreBo]

I get the prohibitory sign after the progress bar reaches about 75%

Boot your system in Verbose Mode and post a picture of your screen when it freezes/hangs.
At Clover Boot Screen press space bar and select Verbose (-v) and Don't reboot on panic (debug=0x100).

If it says "Still waiting for root device" in the bottom left corner
When installing this means that your USB flash drive cannot be found.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
Use a USB2 flash drive.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.
If you only have USB3 ports try with your USB flash drive in a USB2 hub.
Make sure Fast Boot is not activated in your BIOS.

May require USBInjectAll.kext in /EFI/CLOVER/kexts/Other/
May require XHCI-unsupported.kext in EFI/CLOVER/kexts/Other/

 

[mildredrounds]

Boot your system in Verbose Mode and post a picture of your screen when it freezes/hangs.
At Clover Boot Screen press space bar and select Verbose (-v) and Don't reboot on panic (debug=0x100).

If it says "Still waiting for root device" in the bottom left corner
When installing this means that your USB flash drive cannot be found.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
Use a USB2 flash drive.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.
If you only have USB3 ports try with your USB flash drive in a USB2 hub.
Make sure Fast Boot is not activated in your BIOS.

May require USBInjectAll.kext in /EFI/CLOVER/kexts/Other/
May require https://ca.edubirdie.com/ in EFI/CLOVER/kexts/Other/

Thanks for this precise tutorial on how to install High Sierra. I remember when I was trying to install it I had some problems. But unfortunately, I'm not a computer tech so was pretty hard to install it by myself. So I went to a local service where they solved this problem. Thanks to your instructions I will be able to install alone.