- Joined
- Aug 5, 2016
- Messages
- 12
Hi All!
First of all, I'd like to mention that this is the first time I'm attempting at building a hackintosh so please bear with my ignorance as I've just learned about basic terms such as booting, kernel panics, arg, BIOS etc. in these past couple of days
. So yes, I'm a newb 
. Anyways here's the problem:
I'm trying to install Yosemite into my Samsung series 7 slate (which has no operating system), and here's the build:
System: Samsung XE700T1A-H01DE
CPU: Intel Core i5 2467M 1600 MHz / Intel HM65
Graphics: Intel HD Graphics 3000, 1366 x 768
Screen Resolution 1366 x 768
Processor 1.4 GHz Intel Core i5
RAM 4 GB DDR3 SDRAM
Hard Drive 128 GB
Chipset Brand Intel® HD Graphics 3000
*I'm using a 2.0 USB (just like it was suggested by tony in this site), Unibeast 6.1.1 to install Yosemite to the USB, Multibeast Yosemite Edition 2 for post installation( in which I haven't successfully reached yet... :'().
I followed tony's installation guide for installing Yosemite:
Unibeast-2-> I chose Legacy Boot Mode -> Intel HD 3000 (in Graphics Configuration)
I'm attaching pictures of my BIOS setting.
THE PROBLEM: I am able to reach the clover menu and the apple logo with the loading bar appears and the bar gets to about 2/3 of the way and suddenly the screen changes to the panic (also attached to this post) for only about 2 seconds and then its starts loading me back to the clover menu. So yeah, it took me several attempts just to capture a photo of the panic due to its quick appearance and disappearance
. I've run the -v too and I'm attaching that as well.View attachment 206192View attachment 206193
First of all, I'd like to mention that this is the first time I'm attempting at building a hackintosh so please bear with my ignorance as I've just learned about basic terms such as booting, kernel panics, arg, BIOS etc. in these past couple of days
. So yes, I'm a newb . Anyways here's the problem:I'm trying to install Yosemite into my Samsung series 7 slate (which has no operating system), and here's the build:
System: Samsung XE700T1A-H01DE
CPU: Intel Core i5 2467M 1600 MHz / Intel HM65
Graphics: Intel HD Graphics 3000, 1366 x 768
Screen Resolution 1366 x 768
Processor 1.4 GHz Intel Core i5
RAM 4 GB DDR3 SDRAM
Hard Drive 128 GB
Chipset Brand Intel® HD Graphics 3000
*I'm using a 2.0 USB (just like it was suggested by tony in this site), Unibeast 6.1.1 to install Yosemite to the USB, Multibeast Yosemite Edition 2 for post installation( in which I haven't successfully reached yet... :'().
I followed tony's installation guide for installing Yosemite:
Unibeast-2-> I chose Legacy Boot Mode -> Intel HD 3000 (in Graphics Configuration)
I'm attaching pictures of my BIOS setting.
THE PROBLEM: I am able to reach the clover menu and the apple logo with the loading bar appears and the bar gets to about 2/3 of the way and suddenly the screen changes to the panic (also attached to this post) for only about 2 seconds and then its starts loading me back to the clover menu. So yeah, it took me several attempts just to capture a photo of the panic due to its quick appearance and disappearance
. I've run the -v too and I'm attaching that as well.View attachment 206192View attachment 206193
