Trouble with Iris 640 graphics Surface Pro 2017

[Dupo24]

I can get the surface to boot via usb, copied the EFI folder into the System folder, and can get it to boot from the SSD. The issue I'm having is that I cannot get the system to boot when changing the config.plist to pick up graphics. Right now the plist that I have loaded is this exact one: https://github.com/RehabMan/OS-X-Clover-Laptop-Config/blob/master/config_HD615_620_630_640_650.plist which I know isn't correct.

Verbose output shows last lines as appleintellpssi2ccontroller servicematchingtime timed out, which, from my understanding isn't the issue. If I boot normally, the loading bar fills up and locks up. I'll get the error reporting uploaded here when I get home a bit later today, but I figured maybe posting now would give some ideas before then.

I'm currently reading through these posts here to get a better understanding.

[Guide] Alternative to the minStolenSize patch with 32mb DVMT-prealloc

Overview A common problem with Broadwell/Skylake/KabyLake is relatively small DVMT-prealloc setting by PC OEMs. The Apple framebuffer kexts generally assume 64mb or larger, and most PC OEMs use only 32mb. And often, there is no way to change it easily due to limited BIOS, locked down BIOS...

www.tonymacx86.com

and

How to enable 'Kaby Lake' Intel 6xx Graphics (10.12.6+)

Native Kaby Lake graphics drivers for Kaby Lake HD 630 are now available in 10.12.6. In order to enable native KBL graphics, the following changes are necessary. Intel HD 6xx For desktop systems with Intel HD 6xx graphics. Fix for most Intel HD 6xx graphics port layouts on 200 Series...

www.tonymacx86.com

 

[Dupo24]

Sorry for the delay. Here's what I got. I couldn't run the commands listed in the FAQ due to the ACPI files being out of date no matter what I did.

 

[xuzhimin1993]

https://www.tonymacx86.com/threads/surface-pro-2017-install-mojave.273868/

You can check my posts. Core m i5 i7 is all right, but there are still some problems. If you have a solution, please tell me.