- Joined
- Feb 12, 2019
- Messages
- 8
- Motherboard
- MSI H310M PRO VH
- CPU
- i3 8100
- Graphics
- UHD 630
- Mobile Phone
Hi everyone! I’m new in hackintosh, but I’m currently trying to get my first working customac with MacOS Mojave, but I’m facing some awkward issues.
I’ve made my usb stick using unibeast and I haven’t made any further customisation (except for USBInjectAll kext). After this, I’ve changed only XHCI hand-off (from disable to enable, while all the other parameters in tonymac installation guide are missing in my bios) and Clover boots correctly from the usb stick. The first error I faced was the “still waiting for root device” but I don’t know exactly if I solved it simply changing the USB port (I’ve tried all 2.0 ports) and injecting USBInjectAll kext. Anyway, I’ve kept booting, and booting, and booting, but now another error appears, both with USBInjectAll kext injected or disabled (boot args: dart=0 nv_disable=1 -V): clover stucks at “end randomseed +++++++”. I’ve been reading threads here and on ******, but nothing has been working. What could I do?
P.S.: the usb stick I used is a 16gb sandisk usb 3
P.P.S.: the kext is located on another usb stick (8gb Kingston usb 3) created with unibeast, since I wasn’t able to reach the efi partition of the sandisk drive; when I boot from the 16gb drive clover recognises the 8gb drive but bios can’t boot directly from Kingston. Anyway, I keep connected both the drives at the same time.
I’ve made my usb stick using unibeast and I haven’t made any further customisation (except for USBInjectAll kext). After this, I’ve changed only XHCI hand-off (from disable to enable, while all the other parameters in tonymac installation guide are missing in my bios) and Clover boots correctly from the usb stick. The first error I faced was the “still waiting for root device” but I don’t know exactly if I solved it simply changing the USB port (I’ve tried all 2.0 ports) and injecting USBInjectAll kext. Anyway, I’ve kept booting, and booting, and booting, but now another error appears, both with USBInjectAll kext injected or disabled (boot args: dart=0 nv_disable=1 -V): clover stucks at “end randomseed +++++++”. I’ve been reading threads here and on ******, but nothing has been working. What could I do?
P.S.: the usb stick I used is a 16gb sandisk usb 3
P.P.S.: the kext is located on another usb stick (8gb Kingston usb 3) created with unibeast, since I wasn’t able to reach the efi partition of the sandisk drive; when I boot from the 16gb drive clover recognises the 8gb drive but bios can’t boot directly from Kingston. Anyway, I keep connected both the drives at the same time.
Attachments
Last edited: