Contribute
Register

THUNDERBOLT 3 SUCCESS!! GA-Z170X-UD5 TH STARTECH "Thunderbolt 3 to Thunderbolt adapter"

Joined
Apr 20, 2015
Messages
180
Motherboard
GA Z170x UD5-TH
CPU
i5-7600
Graphics
GTX 660 Ti
Mac
iMac, MacBook Pro
Mobile Phone
iOS
Have someone of you updated the Bios to F20 ?

The settings are different now with the name etc...

I get it not working either in Win10 or Sierra. I have updated TB3 to the latest Firmware.
 
Joined
Jun 26, 2011
Messages
30
Motherboard
GIGABYTE GA-Z170X-UD3 Ultra
CPU
Intel Core i7-6700K
Graphics
GIGABYTE GV-N950OC-2GD
Mac
iMac, MacBook Air
Classic Mac
128K, 512K, Centris, Plus
Mobile Phone
iOS
One more thing to try; my setup requires me to boot into Windows first (with the hardware plugged in) and then reboot (not shutdown) into OSX for my Thunderbolt to Firewire adaptor to work.
 
Joined
May 31, 2016
Messages
113
Motherboard
Gigabyte Z170X UD5 TH
CPU
I7-6700K
Graphics
VEGA 64
Mac
iMac, MacBook Pro, Mac Pro
Mobile Phone
Android
Peripherals -> Intel(R) Thunderbolt ->
Intel Thunderbolt Technology = Enabled
ThunderBolt Boot Support = Disabled
Security Level = Unique ID
Thunderbolt PCIe Cache-line Size = Change to 128
Ignore Thunderbolt Option Rom = Disabled
Thunderbolt SwSMI Delay = Change to 10
TBT Device IO resource Support = Enabled
Reserved Memory = Medium
Reserved Mem per phd slot = 32
Reserved Poem per phi slot = 32
Hi Papillon and all. Seems that my bios (F22a) does not have these entries. Anyway TB3 worked on El Capitain but now in Sierra there's no way to make it work. I use the apple adapter, Sierra 10.12.6 and patched everything with windows. Any suggestions?
Thanks!
A.
 
Joined
Dec 21, 2016
Messages
28
Joined
May 25, 2017
Messages
61
Motherboard
Gigabyte 7270X-UD5
CPU
i7 7700K
Graphics
RX580
Mac
MacBook Pro, Mac Pro
Mobile Phone
iOS
I got my TB3 working after following the steps by papillion12 at the top of this thread, but I still can't figure out how to get hotswaping to work. I'm using my TB3 port for my MOTU 828es thunderbolt 2 audio interface (with the Apple TB2 to TB3 adpater). The only way to get my Hack to see the 828es is turn it on first before starting up the computer, and sometimes that doesn't even work and I have to restart the computer again. If I turn off the 828es while the computer is running it'll no longer recognize it when turned back on. I've tried searching the problem but maybe I'm not using the write words to describe my problem.

Any thoughts?
 
Top