Contribute
Register

The New Beginner's Guide to USB Port Configuration

HBG1968 said:
Hi all, noob here. I have folowed the above but i don't see an option to save. When i reboot the ports are all still there. I have tried clover snd open core .
Click to expand...
use the export button to export the USBPorts.kext
 
I thought i did?
 
HBG1968 said:
I'm certan i did.
Click to expand...


We will try to help, but Please fill-out your hardware Profile so that your PC components are visible in the side-panel as you move around the site. This will help others to help you, and it is a part of the Site Rules. Thank you :thumbup:
 
UtterDisbelief 2020
Z390 M GAMING |  i5 9600K |  Radeon Other
UtterDisbelief CL
Z370M-DS3H |  i3 8350K |  Radeon Other
UtterDisbelief KL
GA-Z270-Gaming K3 |  i3 7320 |  GeForce GTX 1050 OC
UtterDisbelief said:
We will try to help, but Please fill-out your hardware Profile so that your PC components are visible in the side-panel as you move around the site. This will help others to help you, and it is a part of the Site Rules. Thank you :thumbup:
Click to expand...
Thank you. I have just added that.
I did export, but I must have missed a step. I saw one of the kext files is not compatible with AMD. I based my install on a YT video from TTL, but used a later version of OC.
 
Last edited:
miliuco said:
It is an excellent job !!! This guide and also the previous one. Congratulations on such a great article. And thanks!!!
Click to expand...


Thank you. I'm glad you found them useful :thumbup:.
 
UtterDisbelief 2020
Z390 M GAMING |  i5 9600K |  Radeon Other
UtterDisbelief CL
Z370M-DS3H |  i3 8350K |  Radeon Other
UtterDisbelief KL
GA-Z270-Gaming K3 |  i3 7320 |  GeForce GTX 1050 OC
UtterDisbelief said:
Pre-amble

When I originally wrote the Beginner's Guide to Creating a Custom USB SSDT the idea was to demystify and simplify the process of configuring all those USB ports our PC motherboards come with, so that they worked properly under macOS. The main sticking-point for many builders was the arbitrary 15-port limit Apple has imposed. We have to accept this, but still make best use of the ports we have which often involves 'losing' a few from the ones that are present, to keep within these confines. What's more, not all ports are the same and we have to take this into account when we configure them.

A very talented software-engineer, and member here, called @headkaze has come up with a very useful tool to help us with a lot of the tedious chores and mental gymnastics we have to perform to get our builds running sweetly, and this is called Hackintool. One part of this superb app is dedicated to USB port configuration.

Now that macOS Catalina is here, Apple is signalling a new way forward. No-longer can we use 32-bit applications, and, from here on in, 3rd-party kexts or drivers have strict limitiations imposed on where they can go and what they can do.

What I realised is that if we combine my earlier guide with @headkaze 's excellent Hackintool, we could utilise an even simpler method for configuring our USB ports, and one that should not give the new, more security-focussed macOS, any red-flag moments.

New Guide

Let's dive in then. Set aside around 30-minutes, depending on your confidence, to get this done.

Your PC motherboard likely has more USB ports than any Apple Mac so far produced. Even a basic Mini-ITX motherboard. So we need to whittle down the number we do have until it matches what Apple's macOS expects, and ensure the ones we keep run at the correct speed, supply the correct power and mount and unmount safely when required, to keep data safe.

The first job is to assemble all the 'tools' you will need:

Disk Utility
Terminal
Clover Configurator or OpenCore Configurator or PlistEdit Pro
USBInjectAll.kext - Edit August 2020 - Recommend v 0.7.3 not 0.7.5.
Hackintool
IORegistryExplorer.app

A USB2.0 flash-drive
A USB3.0 flash-drive

In this guide we will be directly editing our config.plist file. For illustrative purposes we demonstrate our edits using each of the three of the editor options in the list above, so you can make your choice. You only need to use one. See Appendix #1



Step 1 - Install the USBInjectAll.kext and a Port-Limit Removal Patch

We need to make all the ports our PC motherboard has available for us to work with.

To mount your hidden EFI partition you first need to check what it's disk designation is. Run the Disk Utility app. and check what you see here:


On all GUID/GPT partitioned disks the EFI folder will come before any APFS 'containers' and even before the main disk. The image above is actually from High Sierra to make things simpler and even though we can't yet see the EFI partition it will actually be located before the main partition. Because in this case the main area of the disk is "disk0s2" the EFI partition will be at "disk0s1". (The other disk you can see in the screengrab is my separate 500GB data drive. We're ignoring that).

Now we know what the disk designation is we can mount that hidden EFI partition using the magic of Terminal commands:

Code: 
sudo mkdir /Volumes/EFI

sudo mount -t msdos /dev/disk0s1 /Volumes/EFI

What you find in your EFI partition will depend on which bootloader you are using - Clover or OpenCore. Either is fine.

For Clover - copy the USBInjectAll.kext into the EFI/CLOVER/kexts/Other

For OpenCore - copy USBInjectAll.kext into OC/Kexts - AND - add a new kext section to your config.plist. If you are an early adopter of OpenCore you will know that you have to declare each kext with the path to it's executable etc. (See screengrab below).


Port_limit Removal Patch:

The PLR Patches (as we will call them from now on for brevity) are explained in each macOS support section - High Sierra, Mojave and Catalina.

See Appendix #2



For Clover - enter the PLRP in your config.plist . Here is the Catalina one viewed in Clover Configurator.

Here is the same patch inserted using PlistEdit Pro instead (see Appendix #1) As you can see there are five Kexts to Patch, with our two Catalina PLR-Patches at the top of the list.




For OpenCore - set Quirk "XhciPortLimit" as "/true". Here is what it looks like in OpenCore Configurator. See below for what it looks like in PlistEdit Pro.


Here is the same "Quirk" being edited-in using PlistEdit Pro. Pretty simple:



Save and Reboot



Step 2) Check what USB ports you have.

Run Hackintool and select the USB icon in the menu bar:


Different chipsets have different numbers of ports, but the above is fairly typical. You can see my Z370 chipset in the blue highlighted bar.

See Appendix #3



Step 3) Port Discovery

To identify which port on your motherboard you are going to keep and configure, you need to test each one with a USB flash-drive to see where it appears in the output of Hackintool.

Here is a test of the same port using first a USB2.0 drive and second a USB3.0/3.1 drive:

View attachment 434769 View attachment 434770

The physical port is the same, but how it is enumerated is different depending on what type of device is plugged-in - USB2.0 is an HS** port and USB3.0/3.1 is an SS** port. So as you can see, a single, physical USB3 port counts as 2x ports towards our 15-limit because either type of device can be plugged in to it.

Repeat this process for each port on your motherboard and make a record somewhere.

Here are the two plans I made for my Z370M-D3H motherboard:

With this to hand we can now remove ports from the Hackintool list that we do not need so that we can get down to the magic number of 15 as stipulated by Apple. To do this we highlight each port we do not need, using the cmd+mouse method:


Once we have done this we mouse-click on the Delete icon I've circled in red in the above screengrab. This removes ports we do not wish to use or configure.

The final list is as follows:




Step 4) Export our configuration File

Select the icon I've circled in red in the screengrab above to export all your work:


That final USBPorts.kext is the file we want. The other two are useful for other configuration methods but we don't need them today.



Step 5) Installing our configuration and Clean-up

If you still have your EFI partition mounted then you can:

For Clover -

1) Delete USBInjectAll.kext and replace it with USBPorts.kext in EFI/CLOVER/kexts/Other. Remove the PLR-Patches from your config.plist either by editing, or ticking the "Disable" boxes using Clover Configurator.

For OpenCore -

1) Delete USBInjectAll.kext and replace it with USBPorts.kext in OC/Kexts - AND - don't forget to amend the kext name in your config.plist, removing the reference to its executable path:



2) To remove the PLR-Patches either edit them to "/false", or un-tick that Quirk - "XhciPortLimit".



Save and Reboot



Step 6) Job Done - Check your work

Either run Hackintool and select that USB icon to see your ports, or run IORegistryExplorer and scroll the left-pane down to the XHC section.



That's it. Well done on completing your USB Port configuration!



Appendix #1

Your config.plist is in a plain-text format called xml and you need a text-editor to modify it. Which you choose is down to what you feel comfortable with. Many people recommend PlistEdit Pro while others like Apple's Xcode editor. Personally I like Clover Configurator and OpenCore Configurator, though some unfairly criticise them. They are being actively updated and I have built PCs using them without any problems. Whichever you choose has to be able to edit in plain-text, not just in rich-text or a proprietary format. Even macOS's TextEdit will do the job if you know how to set it up.

Remember though, it is always wise to double-check your work and make back-ups, before committing any changes to your PC.:thumbup:


Appendix #2

Please bear in mind Port-Limit Removal Patches are not designed for permanent use because they overwrite and go beyond areas of memory set aside for the job by Apple. Think of your USB ports like a box of a dozen eggs, two rows of six. When full the lid closes and all is safe. If you put another five eggs in down the centre, they appear to fit perfectly - but now you can't close the lid. Things can fall out and break.

In short, long-term use of the patch means data loss and system crashes are only a whisker away.


Appendix #3

This guide concentrates on the XHCI controller all modern Intel chipsets have. Some older motherboards feature chipsets with both the previous EHCI standard and the newer XHCI. Even older still might have just two EHCI. If you see three lines in the top panel of Hackintool with two EHC and one XHC controller then prioritise the XHC because this is where USB3.0 comes from. If you only see two EHC controllers then your system is stuck at USB2.0. You can use these ports though, as you move to the next stage. For more information on these see my original guide as you will need to put some renames in place in your config.plist.


Final Technical Note: Because Apple is reigning-in on what 3rd-party kexts can be installed, it was initially worrying that using any form of kext installation to modify the ACPI/USB ports could get blocked in future. However by putting our USBPorts.kext in the EFI/ or OC/ folder macOS doesn't 'see' it. What's more, if you run kextstat from Terminal you will notice that although other kexts are visible to macOS, USBPorts.kext is not. My take on this is because there is no 'executable' within it's container.


The Credits -

Thank you to @headkaze for working so diligently to make Hackintool the splendid tool-box of useful utilities for Hackintosh builders that it is. In this guide we only touch on one part of what it can do.

Thanks also to to @Sniki for taking up the baton and forking USBInjectAll.kext for the latest motherboard chipsets. We were working on a kext-less ACPI patch until realisation dawned that this method might be simpler.

Thanks, as always, to the owners of the site and my colleagues here at Tonymacx86, for support and encouragement along the way.

:)
Click to expand...

Maybe this post is not adding much after all, but I felt compelled to write it.

Last year I wrote a thread with instructions to have your USB 3.0 ports working in a Z390 motherboard using a hackingtool. You can read it there if you like: https://www.tonymacx86.com/threads/...-usb-3-0-ports-working-mojave-10-14-5.279974/.

However, as I mentioned in the last paragraph of such thread, I never understood the consequences of using the "USBInjectAll.kext" and not creating my "USBPorts.kext"

Now it happened to me, I upgraded my PSU to a Corsair HX850i with Corsair Link and such corsair link made my hack to start waking up every minute if set to sleep. @Leesureone pointed me to this thread which I've never seen.

I did what you say in this thread leaving aside the USB port where the Corsair Link is connected and solved that issue (and prevented God knows which other more).

Thank you so much!
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top