@UtterDisbelief Thanks for the excellent guide. I really help me get up to speed on configuring my motherboard to now work as expected.
I did have some trouble getting the USB-C connector working correctly. I finally seem to have some luck with the TypeC+Sw (UsbConnector=9). When testing in SS only mode, sometime the connected device would showup, sometime not. I could not determine if the enumeration was due to cable orientation.
Question: Is it best to configure each USB 3.x port as HS/SS pair? Is this typically recommended if the port is going to be used by hub?
Thanks again for the great write up... I have posted my config here for others using my Asus ROG Maximus XI Z390 (It includeds the external ports, but also the internal USB2.0 Hub that has Bluetooth on it, and the Aura RGB port (probs not needed
)