The EZ 8000 - Core 2 Duo E8400 - Affordable CustoMac Media Center

[kcirderf97]

The only thing I'm sure I didn't apply to the pen drive was DSDT for my Gigabyte 210 graphic card. Would that cause this problem?

 

[trs96]

The only thing I'm sure I didn't apply to the pen drive was DSDT for my Gigabyte 210 graphic card. Would that cause this problem?

No, the GT 210 should work OOB. Are you connecting via HDMI or VGA ?

 

[kcirderf97]

HDMI

 

[trs96]

HDMI

Did you set the BIOS to AHCI for the Sata mode ?
Anyway, I don't own one of these anymore and never used Enoch so I'm probably
not going to be of much help with this. Post in the thread started by VioletDragon
and others with this Elite 8000 should chime in to help you out. They won't see
your posts here. This guide works up to Yosemite but that's as far as it goes.

 

[kcirderf97]

ok...I will shared this post then
BTW...Here's what I'm seeing now

 

[trs96]

You'll likely have to Inject Nvidia via Enoch to get it to boot. Not sure how to do that
but that's what it takes when using Clover Bootloader.

 

[peetsjunkie]

This has to be one of the most picky installs I have ever done.... no thanks. Wasted too much time just to get the thing to boot. Never had any issues with other builds on newer HW. Noob's beware.

 

[trs96]

@peetsjunkie
This was posted in Dec. 2015. A lot has changed since then. It doesn't work for newer versions of macOS. It works fine for legacy booting of older OS X versions. I suggest any one that wants to run Mojave or High Sierra go with the HP 8300 instead.