The everything works Asus Z390-I Gaming * i7-8700K * SAPPHIRE NITRO+ Radeon RX Vega 64 Build

[jay77]

Hello @Leesureone , my OpenCore is 0.8.5, Lily is 1.6.1, Virtual SMC is 1.3.0 et WhatEverGreen is 1.5.9;
I've also heard that Ventura don't contain drivers for some Graphic cards, maybe it come from this? Thank you.

My Opencore version is 0.8.4

 

[Leesureone]

My Opencore version is 0.8.4

I’m on my phone, and it doesn’t show what video card you have. What are you using?

 

[jay77]

Hi @Leesureone . I have a Radeon RX580 Saphire Nitro +
But I finally success to install Ventura after changing Lilu and WEG for a new one.
But I lost the Bluetooth: I can turn it on blue in the menu bar but it stays grey in the preferences panel...
My EFI is based on the one by @ModMike on this thread.
Maybe these snap can help. Tks.

 

[Leesureone]

Hi @Leesureone . I have a Radeon RX580 Saphire Nitro +
But I finally success to install Ventura after changing Lilu and WEG for a new one.
But I lost the Bluetooth My EFI is based on the one by @ModMike on this thread.
Maybe this can help. Tks.

The two, your RX580 and Bluetooth/Wireless, should not be mutually exclusive. Both should work but with the upgrade to Ventura you will most likely need the Alpha version of the AirportItlwm.kext. https://github.com/OpenIntelWireless/itlwm/releases

I don't know why Bluetooth stopped working but you can check if updating those kexts help. Reset your NVRAM to make sure the changes stick. https://github.com/OpenIntelWireless/IntelBluetoothFirmware/releases

 

[jay77]

Thanks for your help, I've finally make work the Bluetooth.
I had modified the motherboard by installing a Broadcom BCM94352Z module instead the intel one.
I upgraded opencore to 0.8.5, then I update BrcmPatchRAM3, BrcmFirmwareData and BlueToolFixup kexts, all to 2.6.4 version. Reset Nvram and all goes allright.
I think AirportItlwm and IntelBluetooth is for motherboard don't have been modified, no?

 

[Leesureone]

Thanks for your help, I've finally make work the Bluetooth.
I had modified the motherboard by installing a Broadcom BCM94352Z module instead the intel one.
I upgraded opencore to 0.8.5, then I update BrcmPatchRAM3, BrcmFirmwareData and BlueToolFixup kexts, all to 2.6.4 version. Reset Nvram and all goes allright.
I think AirportItlwm and IntelBluetooth is for motherboard don't have been modified, no?

AirportItlwm and IntelBluetooth kexts are for an Intel Bluetooth/Wireless cards

 

[yuhsiunglin]

Hi @jay77, would you give me your EFI? My build is same as yours.

 

[Leesureone]

Hi @jay77, would you give me your EFI? My build is same as yours.

There's this users same build here with EFI Uploads.

[SUCCESS] ASUS ROG Strix Z390-E Gaming + i7-9700k + Asus TUF RX 6800 XT + UHD 630 Headless + Big Sur / Monterey + OpenCore 0.7.8

ASUS ROG Strix Z390-E Gaming + i7-9700k + Asus TUF RX 6800 XT + UHD 630 Headless + Big Sur / Monterey + OpenCore Components: Monitor: LG 27UL650-W 27 Inch 4K UHD LED Monitor with VESA DisplayHDR 400 Motherboard: Asus ROG Strix Z390-E Gaming CPU: Intel Core i7-9700K OC to 4.8 GHz GPU: ASUS TUF...

www.tonymacx86.com

And if you want to update to a later version of OpenCore so you can install Ventura, and have limited experience, you can try OpenCore Auxiliary Tools. There is a bit of a learning curve but it works quite well. Use a USB Drive for testing and back up your system first.

GitHub - ic005k/OCAuxiliaryTools: Cross-platform GUI management tools for OpenCore（OCAT）

Cross-platform GUI management tools for OpenCore（OCAT） - GitHub - ic005k/OCAuxiliaryTools: Cross-platform GUI management tools for OpenCore（OCAT）

github.com

​

 

[yuhsiunglin]

There's this users same build here with EFI Uploads.

[SUCCESS] ASUS ROG Strix Z390-E Gaming + i7-9700k + Asus TUF RX 6800 XT + UHD 630 Headless + Big Sur / Monterey + OpenCore 0.7.8

ASUS ROG Strix Z390-E Gaming + i7-9700k + Asus TUF RX 6800 XT + UHD 630 Headless + Big Sur / Monterey + OpenCore Components: Monitor: LG 27UL650-W 27 Inch 4K UHD LED Monitor with VESA DisplayHDR 400 Motherboard: Asus ROG Strix Z390-E Gaming CPU: Intel Core i7-9700K OC to 4.8 GHz GPU: ASUS TUF...

www.tonymacx86.com

And if you want to update to a later version of OpenCore so you can install Ventura, and have limited experience, you can try OpenCore Auxiliary Tools. There is a bit of a learning curve but it works quite well. Use a USB Drive for testing and back up your system first.

GitHub - ic005k/OCAuxiliaryTools: Cross-platform GUI management tools for OpenCore（OCAT）

Cross-platform GUI management tools for OpenCore（OCAT） - GitHub - ic005k/OCAuxiliaryTools: Cross-platform GUI management tools for OpenCore（OCAT）

github.com

​

Thanks for your help. Now, I success to install Ventura.

 

[GoodBoris]

Hi everyone!

Does anybody know if there are any updates for Samsung 970 SSD? Is there a way to fix TRIM issue has been started since Monterey OS?

Thanks.