System uptime in nanoseconds: ......... boot error!!!

[K0kall]

Hi,

I have problems whit my first Hackintosh build.

System uptime in nanoseconds: and some numbers, different each time.

CPU Intel i7 4770K
MB Asus Maximus VI Formula
HDD Samsung 840
GPU ASUS GTX+ 560 ti

Help pls

 

[WonkeyDonkey]

Moved to correct support forum.

 

[K0kall]

Moved to correct support forum.

10x

 

[carpentryplus25]

Hi,

I have problems whit my first Hackintosh build.

System uptime in nanoseconds: and some numbers, different each time.

CPU Intel i7 4770K
MB Asus Maximus VI Formula
HDD Samsung 840
GPU ASUS GTX+ 560 ti

Help pls

Get us a picture of the kernel panic

 

[K0kall]

Get us a picture of the kernel panic

 

[carpentryplus25]

View attachment 93719

Since you haven't been trying any boot flags give some a try and see what happens try these
-x -v GraphicsEnabler=No PCIRootUID=1 npci=0x2000 cpus=1
just hit the space bar at the chimera boot screen and start typing them In they are case sensitive if they don't work get us another screen shot also are you post install or pre install also be sure you have your bios set according to the mavericks install guide

 

[K0kall]

-x -v GraphicsEnabler=No PCIRootUID=1 npci=0x2000 cpus=1 - System uptime in nanoseconds: 7263201749

-x -v GraphicsEnabler=Yes PCIRootUID=1 npci=0x2000 cpus=1 - System uptime in nanoseconds: 7210298750

-x -v GraphicsEnabler=Yes npci=0x2000 cpus= 1 - System uptime in nanoseconds: 721522017

-x -v GraphicsEnabler=No npci=0x2000 cpus=1 - System uptime in nanoseconds: 7113414482

-x -v GraphicsEnabler=Yes PCIRootUID=1 cpus=1 - System uptime in nanoseconds: 7241819516

-x -v GraphicsEnabler=No PCIRootUID=1 cpus=1 - System uptime in nanoseconds: 7210298750

-x -v GraphicsEnabler=No PCIRootUID=1 - System uptime in nanoseconds: 6842502021

-x -v GraphicsEnabler=Yes PCIRootUID=1 - System uptime in nanoseconds: 7087713308

-x -v GraphicsEnabler=No cpus=1 - System uptime in nanoseconds: 7219795119

-x -v GraphicsEnabler=Yes cpus=1 - System uptime in nanoseconds: 7214184517

-x -v GraphicsEnabler=No npci=0x2000 - System uptime in nanoseconds: 6837982512

-x -v GraphicsEnabler=Yes npci=0x2000 - System uptime in nanoseconds: 6839891741

-x -v GraphicsEnabler=No - System uptime in nanoseconds: 6841925431

-x -v GraphicsEnabler=Yes - System uptime in nanoseconds: 6840817719

-x -v - System uptime in nanoseconds: 6856632123

 

[K0kall]

Since you haven't been trying any boot flags give some a try and see what happens try these
-x -v GraphicsEnabler=No PCIRootUID=1 npci=0x2000 cpus=1
just hit the space bar at the chimera boot screen and start typing them In they are case sensitive if they don't work get us another screen shot also are you post install or pre install also be sure you have your bios set according to the mavericks install guide

Is my first time boot/install, never seen welcome mavericks screen.

i think the bios is set according to the mavericks install guide

SATA Mode Selection set to AHCI
Intel Virtualization Technology set to Disabled

I'm sorry about my english guys

 

[neilhart]

Hi,

I have problems whit my first Hackintosh build.

System uptime in nanoseconds: and some numbers, different each time.

CPU Intel i7 4770K
MB Asus Maximus VI Formula
HDD Samsung 840
GPU ASUS GTX+ 560 ti

Help pls

I suggest that you read this thread: http://www.tonymacx86.com/mavericks-desktop-guides/116466-guide-asus-maximus-vi-hero-build.html

From my experience with ASUS motherboards, you need to patch the BIOS to proceed. However it may be possible to work around patching the BIOS using other methods (Google for a guide if you want to go that route).

Good modding,
neil

 

[carpentryplus25]

Is my first time boot/install, never seen welcome mavericks screen.

i think the bios is set according to the mavericks install guide

SATA Mode Selection set to AHCI
Intel Virtualization Technology set to Disabled

I'm sorry about my english guys

You can try adding maxmem=4096 dart=0 to the string of boot flags I told you already but I'm sure it's the bios most always kernel panics point to the bios settings also with your graphics card I know you need GE=No which is defaulted in chimera so it's not needed