- Joined
- Nov 1, 2013
- Messages
- 112
- Motherboard
- Gigabyte GA-Z87N-WIFI
- CPU
- i7-4770K
- Graphics
- GTX 760
- Mac
- Mobile Phone
Written from the perspective of someone who is switching from Chimera to Clover. Yes iMessages is working as with all other reported clover users.
None of the work listed here is my own; merely gathered tons of posts and articles and put what worked here. Many thanks are owed to the people here who post all this information!
1. Follow the Maverick Clover Guide. Looks like there's a Yosemite one now. It wasn't there when I upgraded, but I assume it works.
2. The guide mentioned above has obvious places that need to be changed for Yosemite. One such part that may cause hesitation is that you will need to create the 10.10 folder in /USB/EFI/CLOVER/kexts yourself.
3. On step 20-25, I went back and used xattr -c on all the files I copied. The reason I did this is because my first attempt to do this resulted in some sort of "unable to verify installation. Image appears to be corrupt" at the very end of the install. Hence I was being extra safe by ensuring all files I created looked the same as the other files.
4. Once the install is complete, go back and don't use MB. Instead, all you need is the Clover Configurator. First copy the minimal config.plist at the end of the guide to /Volume/EFI/EFI/CLOVER (I used config.plist-Standard.zip).
4a. To enable audio, see here and run the command.
4b. To enable TRIM, in your config.plist have the following in your KextsToPatch section:
5. In my build, I noticed that the computer was dying on playing videos. Fix is to follow this site.
6. [edit] To enable HDMI audio, follow toleda's guide.
7. For people with my wireless / bt card. See this.
None of the work listed here is my own; merely gathered tons of posts and articles and put what worked here. Many thanks are owed to the people here who post all this information!
1. Follow the Maverick Clover Guide. Looks like there's a Yosemite one now. It wasn't there when I upgraded, but I assume it works.
2. The guide mentioned above has obvious places that need to be changed for Yosemite. One such part that may cause hesitation is that you will need to create the 10.10 folder in /USB/EFI/CLOVER/kexts yourself.
3. On step 20-25, I went back and used xattr -c on all the files I copied. The reason I did this is because my first attempt to do this resulted in some sort of "unable to verify installation. Image appears to be corrupt" at the very end of the install. Hence I was being extra safe by ensuring all files I created looked the same as the other files.
4. Once the install is complete, go back and don't use MB. Instead, all you need is the Clover Configurator. First copy the minimal config.plist at the end of the guide to /Volume/EFI/EFI/CLOVER (I used config.plist-Standard.zip).
4a. To enable audio, see here and run the command.
4b. To enable TRIM, in your config.plist have the following in your KextsToPatch section:
PHP:
<key>Name</key>
<string>IOAHCIBlockStorage</string>
<key>Find</key>
<data>
AEFQUExFIFNTRAA=
</data>
<key>Replace</key>
<data>
5. In my build, I noticed that the computer was dying on playing videos. Fix is to follow this site.
6. [edit] To enable HDMI audio, follow toleda's guide.
7. For people with my wireless / bt card. See this.