Contribute
Register

Successful build! Gigabyte GA-Z170X-UD5 + Skylake i7 6700k + HD530 + dual monitor

Status
Not open for further replies.
Joined
Aug 7, 2016
Messages
18
Guys,

After a time fighting against several problems I got it:
- Dual monitor (HDMI + DVI)
- Back panel and front panel audio
- Ethernet (I'am waiting my wifi+bt board)
- Apple kb wired until my bt board arrives
- Dual monitor boot :D (sometimes it doesn't work, but it often works)

HW:
- Gigabyte GA-Z170X-UD5
- Intel HD530

I've installed:
- audio clover HDMI
- drivers for HD530 and realtek (audio) and ethernet

A strange thing that I done was:
- Set up the cfg as iMac 17
- Install all drivers + add patchs
- Set up the cfg as mac pro

The unique problem:
When the display/s turn/s off, sometimes it/they crash/es.


I attach mi EFI folder.
 

Attachments

  • EFI.zip
    16 MB · Views: 187
  • Screen Shot 2016-09-01 at 1.26.11 PM.png
    Screen Shot 2016-09-01 at 1.26.11 PM.png
    27 KB · Views: 387
  • Screen Shot 2016-09-01 at 1.26.24 PM.png
    Screen Shot 2016-09-01 at 1.26.24 PM.png
    32.7 KB · Views: 380
  • Screen Shot 2016-09-01 at 1.26.32 PM.png
    Screen Shot 2016-09-01 at 1.26.32 PM.png
    51.7 KB · Views: 381
I must have missed it...is there a guide somewhere in your post?
 
If you look at the other guides in this forum section, you will a more detail in a step by step procedure. Your OP isn't in a guide format.
 
I added this post to the Forum part of the site because I'm not doing a guide because I don't have te necessary information to do it... Just I wanted to share that I achived the dual monitor with the HD530, sharing that I set some cfg and then another one.. Sorry for the misunderstood
 
Guys,

After a time fighting against several problems I got it:
- Dual monitor (HDMI + DVI)
- Back panel and front panel audio
- Ethernet (I'am waiting my wifi+bt board)
- Apple kb wired until my bt board arrives
- Dual monitor boot :D (sometimes it doesn't work, but it often works)

HW:
- Gigabyte GA-Z170X-UD5
- Intel HD530

I've installed:
- audio clover HDMI
- drivers for HD530 and realtek (audio) and ethernet

A strange thing that I done was:
- Set up the cfg as iMac 17
- Install all drivers + add patchs
- Set up the cfg as mac pro

The unique problem:
When the display/s turn/s off, sometimes it/they crash/es.


I attach mi EFI folder.
Hello. does it work dual monitors?
 
Hello. does it work dual monitors?

Yes, as I said above, it works, but not always. When the dual monitor boot doesn't work, I just have to reboot and unplug the hdmi, restart again, and then dual monitor boot works again.
 
Yes, as I said above, it works, but not always. When the dual monitor boot doesn't work, I just have to reboot and unplug the hdmi, restart again, and then dual monitor boot works again.
There is my EFI, but dual monitors doesn't work. what you think about it? help me, please.
 

Attachments

  • EFI.zip
    16.2 MB · Views: 131
Status
Not open for further replies.
Back
Top