[SUCCESS] Silent but Violent GA Z370N - i5 8400 - 16GB - 500GB NVMe

[ApppW]

thanks,i tried.i don't know why there is still a stop sign when it runs. and it stops right here.

 

[robifis]

thanks,i tried.i don't know why there is still a stop sign when it runs. and it stops right here.

How is your hard drive formatted? APFS or HSF?

 

[ApppW]

[QUOTE =“robifis，post：1728866，member：372468”]How is your hard drive formatted? APFS or HSF?[/ QUOTE]
Is it necessary to format the hard disk? I just have built my computer without any system, and only one SSD.

 

[robifis]

Is it necessary to format the hard disk? I just have built my computer without any system, and only one SSD.

What I mean is, when you were formatting your hard drive during the installation, did use APFS or Mac OS Journaled?
There seems to be an issue with that, that's why it's not booting.

 

[ApppW]

What I mean is, when you were formatting your hard drive during the installation, did use APFS or Mac OS Journaled?
There seems to be an issue with that, that's why it's not booting.

oh, i did it with mac os journaled, and after that i formate the efi partition into fat32 form to modify the efi files in Windows system，does it affect the process？

 

[robifis]

oh, i did it with mac os journaled, and after that i formate the efi partition into fat32 form to modify the efi files in Windows system，does it affect the process？

Yes, that is the reason you're not booting.
If you want to dual boot this is how you do it:

1. Boot into installer from USB Drive
2. Open Disk Utility and Format to APFS
3. Install macOS
4. Boot into macOS but using the USB Stick
5. Install all the neccessary kexts etc (or copy the EFI file I sent you to the EFI folder on your HDD)
6. Install Windows
7. Boot back into OS via the USB Stick
8. Install Clover Bootloader again (download is on here version 4428)
9. Profit

 

[ApppW]

Yes, that is the reason you're not booting.
If you want to dual boot this is how you do it:

1. Boot into installer from USB Drive
2. Open Disk Utility and Format to APFS
3. Install macOS
4. Boot into macOS but using the USB Stick
5. Install all the neccessary kexts etc (or copy the EFI file I sent you to the EFI folder on your HDD)
6. Install Windows
7. Boot back into OS via the USB Stick
8. Install Clover Bootloader again (download is on here version 4428)
9. Profit

Thanks! I will try it later.

 

[ApppW]

Thanks! I will try it later.

Yes, that is the reason you're not booting.
If you want to dual boot this is how you do it:

1. Boot into installer from USB Drive
2. Open Disk Utility and Format to APFS
3. Install macOS
4. Boot into macOS but using the USB Stick
5. Install all the neccessary kexts etc (or copy the EFI file I sent you to the EFI folder on your HDD)
6. Install Windows
7. Boot back into OS via the USB Stick
8. Install Clover Bootloader again (download is on here version 4428)
9. Profit

hey, i got a new problem, what's wrong with it

 

[Busta999]

@robifs Hi I have almost the same hw as you.

I used your efi.zip and installed it to my EFI partition in the correct folder.

It got an Ethernet Port and sound card working Great thanks.

Still to work out wifi and BT.

How did you stabilise the Video ?

I get sooo much corruption it makes it largely unusable ie one fifth of the current window is flashing 5 times across the screen diagonally down to the left.

Like you I don't need an Nvidia card - but if I could get a stable 4k that would be great!

 

[hornet123]

Hi there!
I have exactly like your build. Everything working great, but I can't adjust the volume up/down/mute with my Logitech K400 Plus keyboard!! I did try your EFI/CLOVER/kexts ONLY but no luck! Do you know how to solve this issue?

NOTE: I am using LG 4K 43" TV with HDMI 2.0.