Contribute
Register

[Success] PYNTy-Mac i7 8700 - Z390 I AORUS PRO WIFI - 16GB Ram - Sapphire Rx 580 - Mojave 10.14.3

Joined
Dec 28, 2013
Messages
72
Motherboard
Z390 I AORUS PRO WIFI
CPU
I7-8700
Graphics
RX 580
Mac
iMac, MacBook Pro
Mobile Phone
iOS
Hi, I have little problem. Audio not working :/ Any tips? Try MultiBeast? THX
Hi, You should review your "kext/Other" folder and have AppleALC.kext Version 1.3.4 or greater, since version 1.3.4, support was provided to ALC1220 layout-id 16 for Gigabyte Z390.

Download the latest version of AppleALC from the Releases page. Mount your EFI partition, and copy it to Clover/kexts/Other.

Edit the Inject key under Devices/Audio in your config.plist. I advise you to use the Clover Configurator. Replace 1 with the layout ID you wish to use. Look at the AppleALC wiki for the supported layout IDs for our codec Realtek® ALC1220.

I used 1, The audio works perfectly.

I hope I helped you! Greetings!
Mark
 
Joined
Dec 28, 2013
Messages
72
Motherboard
Z390 I AORUS PRO WIFI
CPU
I7-8700
Graphics
RX 580
Mac
iMac, MacBook Pro
Mobile Phone
iOS
Thanks for your reply. Could you tell me about your boot time?
How about your boot time(Maybe called startup time)?
Thanks again.
Hi, from the Clover screen, exactly 15 seconds to the Apple logo, then 2 seconds to the start screen, I'm in total 17 seconds from clover.
 
Joined
Feb 9, 2019
Messages
9
Motherboard
Gigabyte Z390I Aorus Pro Wifi
CPU
i7-9600K
Graphics
UHD 630
Mac
MacBook Pro
Mobile Phone
iOS
After few days of use, I'm curious that is it the problem of hackintosh/Mojave that when my mouse hovering the options in dropdown menu, the hovered option will not be highlighted, and the submenu will not show as well.

e.g let say my mouse is hovering "Options", the sub menu will not show until I double click it.
Anyone has the same mouse hover problem as mine?
 
Joined
Dec 28, 2013
Messages
72
Motherboard
Z390 I AORUS PRO WIFI
CPU
I7-8700
Graphics
RX 580
Mac
iMac, MacBook Pro
Mobile Phone
iOS
Anyone has the same mouse hover problem as mine?
Hi, I don't have that problem, I m thinking it might be the IGPU, you got it set up? The i7 9600k is not officially accommodating with Mac yet, even if it works out, perhaps the kexts of FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext may need to be required.

I made some changes to my config.plist and improved my igpu performance in i7 8700 (no K) in this week, in the system information I figure only the Rx 580, but if my igpu works, I could see him working with Final cut Pro, now I feel the system much more fluid, maybe I'm overreacting, but I think he s very stable.
 
Joined
Jan 29, 2019
Messages
6
Motherboard
GA Z390i Aorus
CPU
i7 8700K
Graphics
HD 630
This build is with a rx580, I think with IGPU HD630 the SMBIOS is 18.1 and change other values.
Hi! It will be my first Hackintosh build. Can you help me with change other values? I use same MB Z390i with F5d BIOS, 8700K, Samsung 970 EVO on the back M.2 port, BCM94360CS2 with converter on the front M.2 port NVMe (works on Windows, of course. I pulled out the Intel CNVI card).
But, I still cannot install. I already used your BIOS setting, EFI folder. Thanks.
 
Joined
Dec 28, 2013
Messages
72
Motherboard
Z390 I AORUS PRO WIFI
CPU
I7-8700
Graphics
RX 580
Mac
iMac, MacBook Pro
Mobile Phone
iOS
Hi! It will be my first Hackintosh build. Can you help me with change other values? I use same MB Z390i with F5d BIOS, 8700K, Samsung 970 EVO on the back M.2 port, BCM94360CS2 with converter on the front M.2 port NVMe (works on Windows, of course. I pulled out the Intel CNVI card).
But, I still cannot install. I already used your BIOS setting, EFI folder. Thanks.
Hi, if of course, I'm happy to help. Tell me what mistake you're going to install.

My EFI folder, gone by changing so I can leave the system as stable as possible, and I've succeeded. At first, maybe it was different for the installation. I recommend you not plug the disk where you have Windows installed, just leave the SSD where you're going to install Mojave.

Tell me more about the mistake that appears to you. Greetings!
 
Joined
Mar 12, 2019
Messages
7
Motherboard
Aorus Z390 I Pro Wifi
CPU
i7-8700K
Graphics
GTX 1060
Mac
MacBook Pro
Mobile Phone
Android
@markoskz
Huge thanks bro! Took me a while but got everything working (so far)! Thanks for that EFI! Cheers!
 
Joined
Feb 5, 2019
Messages
1
Hi! I have not yet tried. I don't have the adapter, yet, I bought it in China, and it will be arriving on March 6, approximately. When I get it, I'll will try it out, although I have seen in other post that does not work.
Hi , does it work? (BCM943602CS install in M.2(SSD) slot with adapter).
 
Joined
Dec 28, 2013
Messages
72
Motherboard
Z390 I AORUS PRO WIFI
CPU
I7-8700
Graphics
RX 580
Mac
iMac, MacBook Pro
Mobile Phone
iOS
Joined
Dec 28, 2013
Messages
72
Motherboard
Z390 I AORUS PRO WIFI
CPU
I7-8700
Graphics
RX 580
Mac
iMac, MacBook Pro
Mobile Phone
iOS
Hi , does it work? (BCM943602CS install in M.2(SSD) slot with adapter).
Hi, The adapter hasn't arrived yet. I made the order for this adapter, but you also need other adapter for sdd nvme slots. Because the M2 CNvi Wifi slot is not compatible.

It's two adapters together what you need to work, until another solution comes up. This is the second adapter, to achieve something like that:

71ER9OCQ6IL.jpg
 
Top