Hey there, I'm looking for someone who can help me bring back my Hackintosh alive. OK here's my build:
GA-Z77X-UP5-TH (Motherboard)
Intel Core i5 3570K/3.40GHz/6MB CACHE/LGA1155 Ivy Bridge (Processor)
[Overclocked 4.2 GHz]
Kingston HyperX Genesis 8GB (2x4 GB) DDR 3 1600 MHz (RAM)
[will be adding another 8GB (2x4 GB) soon]
Cooler Master MWE650W 80 PLUS GOLD (Power Supply)
[Just changed into New PSU as the old PSU spoilt]
Kingston HyperX 120GB SSD (Storage)
[Installed Windows 10]
Crucial MX500 500GB SSD (Storage)
[NEW SSD For Hackintosh; Previously was using INTEL SSD 120 GB for Mountain Lion]
2 x Western Digital 1TB HDD (Backup Storage)
[1 For Windows & 1 For Hackintosh]
Cooler Master MA620P TUF (CPU Cooler)
[Replaced this New too, previously was using liquid cooleer]
Intel HD 4000 (onboard GPU)
[Will be adding RX580 soon, still in search for a good deal]
ASUS WiFi (USB Dongle)
COOLER MASTER SILENCIO 650 (Casing)
The story goes like this:
I was using OSX Mountain Lion on this build back in 2013, it was perfectly fine till I wanted to upgrade to High Sierra in 2017. I have successfully done a fresh install OSX High Sierra and was running fine till my PC gave a problem. It turns on for 2 seconds and turns off again. Due to my busy schedule, I just work on my MacBook Pro 13"(Mid 2012) and I couldn't do much about my PC and left it sleeping for almost 3 years now.
Due to Pandemic and Work From Home, I've decided to bring my PC back up running. Therefore, I've done my research on parts to change, upgrade, and have also purchased them. I've done installing Windows 10 on my SSD and it works fine. YEAY!!! my PC is fine.
3 days now and I still can't get through Step 1, Which is creating a USB INSTALLER. I'm Planning to Install macOS Catalina as I am comfortable with this OS using on my MacBook. I have a Job to complete and I would like to work on the Hackintosh as it will be smoother than my MacBook.
I Have tried Unibeast, Createinstallmedia, vanilla, and so on.
When I try to boot on my PC, the BIOS detects the USB, but not the UEFI.
Please help me to get it done to SUCCESS. or Share any Config.Plist/Kext/Drivers/ or STEPS just for this kind of build.
Your help is very much appreciated. If in need of any further details on my build please let me know. Thanks
[UPDATE]: Managed to pass Step 1. : When Erase, I didn't Select GUID Partition Map ( Silly Mistake )
Manage to view USB Installer on Clover, Proceeded but stuck on this arg shown below.
_dlil_attach_flowswitch_nexus: en0 9000 1500. (can view IMG_0480.jpg for reference)
Anyone knows how to solve this part.