- Joined
- Aug 28, 2015
- Messages
- 7
- Motherboard
- Intel NUC c230 series
- CPU
- i9 8950HK
- Graphics
- UHD 630
- Mobile Phone
Hi,
I succesfully installed mac os mojave 10.14.4 on this :
1) Use Tonymacx86 guide to create usb boot stick
2) Use theses Bios Config :
3) boot from the USB key and install Mojave as directed by tonymacx86 guide.
4) reboot from the USB key, mount your efi partition with Clover configurator latest edition.
In the EFI partition, open Efi folder and replace your clover folder with this one (unzipped of course) :
5) restart ! That’s all folk !
Anything except wifi works like a charm.
IMPORTANT:
The most important part is the CSM config on BIOS because without it, you have to wait for 5 minutes at each boot before getting keyboard and mouse to work.
For the wifi, I haven’t found the right kext yet. It’s quickiest to change it (the wifi card) with a broadcom one. That seems to works out of the box.
Thanks to
I succesfully installed mac os mojave 10.14.4 on this :
1) Use Tonymacx86 guide to create usb boot stick
UniBeast: Install macOS Mojave on Any Supported Intel-based PC
The following guide is a complete walkthrough for updating to or installing a fresh version of macOS Mojave. It requires no experience and all of the basic installation and post-installation tools are available on tonymacx86.com. Table of Contents Step 1: Download macOS Mojave Step 2: Create...
www.tonymacx86.com
2) Use theses Bios Config :
3) boot from the USB key and install Mojave as directed by tonymacx86 guide.
4) reboot from the USB key, mount your efi partition with Clover configurator latest edition.
In the EFI partition, open Efi folder and replace your clover folder with this one (unzipped of course) :
5) restart ! That’s all folk !
Anything except wifi works like a charm.
IMPORTANT:
The most important part is the CSM config on BIOS because without it, you have to wait for 5 minutes at each boot before getting keyboard and mouse to work.
For the wifi, I haven’t found the right kext yet. It’s quickiest to change it (the wifi card) with a broadcom one. That seems to works out of the box.
Thanks to
kabauterman
www.tonymacx86.com
shumbola
www.tonymacx86.com
Attachments
Last edited: