- Joined
- Jun 18, 2013
- Messages
- 39
- Motherboard
- INTEL NUC DC3217IYE
- CPU
- i3-3217U
- Graphics
- HD40000
- Mac
- Classic Mac
- Mobile Phone
[success] nab’s INTEL NUC DC3217IYE, i3-3217U (ethernet edition)
@BerndVP/@Chanquete69, glad you were able to make progress. I am afraid I am too much of a noob to advise you on your remaining niggles, but I can answer the original question and comment on my build:
.. The only thing I changed was to set the graphics memory in your Bios to 128m.
My memory - according to system report - is correctly identified as 1600 MHz
At one point I forgot to install the AppleIntelCPUPowerManagement kext in multibeast and the boot stopped at the same point reported by BerndVP
For HDML audio, I do have a DSTD patched based on the v42 bios - you are welcome to a copy if you like, but as noted above it is not substantively different from syngatesfan200's version, and either work for HDML on my NUC.
For wake from sleep - I did have one install with similar symptoms to chanquete69 (the system would sleep but would not restart without a poweroff) but I am 99% sure i missed one of the kext when doing the installation. After I followed syngatesfan200's install in the correct order then it worked (note it was necessary to set darkwake=10)
hope that helps!
@BerndVP/@Chanquete69, glad you were able to make progress. I am afraid I am too much of a noob to advise you on your remaining niggles, but I can answer the original question and comment on my build:
Are there any other things I need to set up in the BIOS?
.. The only thing I changed was to set the graphics memory in your Bios to 128m.
My memory - according to system report - is correctly identified as 1600 MHz
At one point I forgot to install the AppleIntelCPUPowerManagement kext in multibeast and the boot stopped at the same point reported by BerndVP
For HDML audio, I do have a DSTD patched based on the v42 bios - you are welcome to a copy if you like, but as noted above it is not substantively different from syngatesfan200's version, and either work for HDML on my NUC.
For wake from sleep - I did have one install with similar symptoms to chanquete69 (the system would sleep but would not restart without a poweroff) but I am 99% sure i missed one of the kext when doing the installation. After I followed syngatesfan200's install in the correct order then it worked (note it was necessary to set darkwake=10)
hope that helps!