[SUCCESS] MiniPro Hackintosh Yosemite/i5-4690k/H97i-plus/16GB/GTX-970

[seventyHack]

Thank you for the advice!
Will try))

SUCCEEEEEEESS!!! It works

 

[replicant]

So, I've got nearly identical parts as you guys, and I seem to be stuck at [IOBluetoothHCIController][start] -- completed during the Unibeast install step.

Thoughts?

Here's a pic of the full verbose logging.

PLEASE help.

Thanks much.

 

[Jithin.C.V]

Update your build's hardware details under Profile > Basic Information section in the below format (Profile link is available on the upper right side of this website), Without hardware details we cannot suggest exact solutions.

System : Motherboard + BIOS Version + Bootloader (Clover/Chameleon/Chimera)
CPU : Detailed CPU Model
Graphics : All Graphics Devices

For Example,
System : GA-Z97X-UD5H (F9F) (CLOVER)
CPU : Intel Core i7-4790K
Graphics : Intel HD 4600/NVIDIA GeForce GTX 980

So, I've got nearly identical parts as you guys, and I seem to be stuck at [IOBluetoothHCIController][start] -- completed during the Unibeast install step.

Thoughts?

Here's a pic of the full verbose logging.

PLEASE help.

Thanks much.

You probably have graphics issue.

Connect monitor to DVI/HDMI port on the GFX card, avoid converters.

Then set graphics card as your primary video adapter/initial display port on BIOS.
Disable integrated graphics on BIOS.

Then try to boot with "dart=0 nv_disable=1 -x -f -v"

 

[Selby]

Hi

I am having the same problem - the install hangs at the same point. However, I don't have a graphics card. Can anyone make a suggestion? I have tried install with both Unibeast and Clover but the install hangs at the Apple logo, with the bar filled a third of the way up. When I turn verbose on, I get the same screen as posted above.
Tha
nks

 

[Jithin.C.V]

Hi

I am having the same problem - the install hangs at the same point. However, I don't have a graphics card. Can anyone make a suggestion? I have tried install with both Unibeast and Clover but the install hangs at the Apple logo, with the bar filled a third of the way up. When I turn verbose on, I get the same screen as posted above.
Tha
nks

Connect monitor to DVI/HDMI port without any converter.

Then try to boot with "dart=0 -f -v -x"

 

[Selby]

Thanks I'm going to give it a try

 

[Selby]

No luck I am afraid - see attached. Any ideas? Much apprec

 

[Jithin.C.V]

View attachment 135409No luck I am afraid - see attached. Any ideas? Much apprec

Seems like the issue with graphics..

Try to boot with "dart=0 IGPEnabler=Yes GraphicsEnabler=No -f -v"

How you connected your monitor??

 

[Selby]

Seems like the issue with graphics..

Try to boot with "dart=0 IGPEnabler=Yes GraphicsEnabler=No -f -v"

How you connected your monitor??

Connected to VGA port

 

[Jithin.C.V]

Connected to VGA port

VGA not supported on Yosemite. Use DVI or HDMI connection.