[Success] Mavericks on ASUS p8p67 EVO - Overclocked 4.2Ghz i7 2600k - GTX 560ti

Discussion in 'Mavericks Desktop Guides' started by jesselid, Nov 10, 2013.

  1. jesselid

    jesselid

    Joined:
    Feb 13, 2012
    Messages:
    51
    Mobo:
    10.7.4
    CPU:
    2600K i7
    Graphics:
    560ti
    Nov 10, 2013 at 11:33 PM #1
    jesselid

    jesselid

    Joined:
    Feb 13, 2012
    Messages:
    51
    Mobo:
    10.7.4
    CPU:
    2600K i7
    Graphics:
    560ti
    [​IMG]
    Warning!!!
    This is what worked for me... I'm typing on it now... but saying that, I'm not responsible for any damaged caused by this thread. We are flashing BIOS which can be hazardous! If we don't flash BIOS, sleep won't work without sleep kexts.

    PREPRODUCTION
    download Unibeast
    follow tonymac instructions for installing unibeast on usb
    download and add "Multibeast - Mavericks" to usb - http://www.tonymacx86.com/downloads.php?do=cat&id=3
    download, unzip, add DSDT to usb (attached to this post)
    download, unzip, add RevoGirl's Modded P8P67-EVO-ASUS-2302_modified to usb (attached to this post)(MAKE SURE YOUR NORMAL BIOS VERSION IS 2302!!!!!!!!!!!)
    reboot

    BIOS
    enter BIOS (press delete)

    [​IMG]




    flash BIOS to RevoGirl Modded P8P67-EVO-ASUS-2302.ROM (it might reboot afterwards, enter back into BIOS)

    [​IMG]




    optimized defaults (F5)
    go to advanced mode (top right)
    ai tweaker/turbo ratio/by per core (set each core to 42)
    ai tweaker/internal PLL overvoltage/disable
    ai tweaker/memory frequency/1600mhz (whatever yours is)

    [​IMG]




    advanced/cpu configuration/cpu c1e/enabled
    advanced/cpu configuration/cpu c3 report/enabled
    advanced/cpu configuration/cpu c6 report/enabled

    [​IMG]




    advanced/sata configuration/sata mode/AHCI mode

    [​IMG]




    boot/wait for 'f1' if error/disable
    boot/option rom messages/keep current
    boot/boot priority #1/[your about-to-be-created mavericks hard drive] (not unibeast)
    exit and save changes

    [​IMG]




    UNIBEAST
    boot from unibeast disk (F8 during asus boot screen)
    clear target disk using disk utility (skip this if you’re just updating)
    install mavericks to target disk
    should restart afterwards
    still boot from usb
    at boot loader screen select new maverick’s disk & add -f -v GraphicsEnabler=Yes

    MULTIBEAST
    quick start/userDSDT (select DSDT on usb)
    drivers/audio/realtek alcxxx/with dsdt/ALC892
    drivers/disk/trim enabler/10.9.0 TRIM Patch (if ssd)
    drivers/misc/fakesmc plugins & HWMonitor app
    drivers/network/hnak's AppleIntelE1000e.kext & Lnx2Mac RealtekRTL81xx (nevermind)
    drivers/system/patched appleintelcpupowermanagement/OS X 10.9.0 (deletes nullcpupowermanagement)(if reboot you get p-state error, try -f or UseKernelCache=No, if nothing still, re-install drivers/misc/nullcpupowermanagement to boot)
    customize/boot options/GraphicsEnabler=Yes & verbose boot
    customize/ssdt options/sandy bridge core i5/i7 overclocked
    build/select hard drive/install
    reboot
    done



    EXTRAS

    fixfreeze (if your computer freezes randomly)(works on Mavericks) - http://www.tonymacx86.com/mountain-...ermi-freeze-back-latest-drivers-10-8-3-a.html

    Get iCloud, FaceTime, Messages to work
    download "Chameleon Wizard" - http://www.insanelymac.com/forum/topic/257464-chameleon-wizard-utility-for-chameleon/
    from chameleon wizard install FileNVRAM.dylib to /Extra/Modules folder (make sure “Modules” is Capitalized, IMPORTANT!!!)
    delete all network interfaces in System Prefs (minus button)
    delete /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    reboot
    make new network interface and call it “en0” (zero)
     

    Attached Files:

  2. constantinenoise

    constantinenoise

    Joined:
    Dec 12, 2013
    Messages:
    1
    Mobo:
    Mavericks / P8P67 EVO
    CPU:
    Intel Xeon 3.2 GHz
    Graphics:
    Nvidia GTX 560
    Dec 12, 2013 at 9:13 PM #2
    constantinenoise

    constantinenoise

    Joined:
    Dec 12, 2013
    Messages:
    1
    Mobo:
    Mavericks / P8P67 EVO
    CPU:
    Intel Xeon 3.2 GHz
    Graphics:
    Nvidia GTX 560
    Hello! I'am Install Macintosh 10.9 Mavericks.

    Available:

    1. Installed Macintosh OSX 10.9.
    2. Motherboard ASUS P8P67 EVO.
    3. CPU Intel Xeon E3-1230 3.2 GHz.
    4. Graphics Card Nvidia GTX 560.
    5. Memory Crucial 16Gb 7.7.7.20 1600 MHz, 4 Modules.
    6. Your Modified Bios Version 3202

    Please tell me which one is better to install the boot under this configuration?

    Options:

    1. Chamelion
    2. Clover (With support for EFI)

    Really looking forward to your advice!

    Please write url's for bootloader's version downloads!

    Sorry for my english :)
     
  3. uyt7

    uyt7

    Joined:
    Aug 4, 2013
    Messages:
    1
    Oct 28, 2016 at 8:18 PM #3
    uyt7

    uyt7

    Joined:
    Aug 4, 2013
    Messages:
    1
    So, I have basically the same setup except I have an EVGA 750ti SC. Are there any special modifications i would need to do?
     

Share This Page